Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:ref:genmsr01 [2020/10/30 21:37] ixl2relax [Basic Diagnosis - Won't Start] |
techtalk:ref:genmsr01 [2022/07/17 01:20] ixl2relax [Starter Won't Turn Over] |
||
---|---|---|---|
Line 113: | Line 113: | ||
**If all these have power, the motor should be turning.** | **If all these have power, the motor should be turning.** | ||
- | **As mentioned in the SP section on Voltages & Grounds, | + | **As mentioned in the [[techtalk:evo:elec01|SP section on Voltages & Grounds]], |
check all grounds in the system:** | check all grounds in the system:** | ||
Line 123: | Line 123: | ||
Now move the BLACK meter probe to any point on the bike\\ | Now move the BLACK meter probe to any point on the bike\\ | ||
that should be grounded and the meter should read the same\\ | that should be grounded and the meter should read the same\\ | ||
- | as the Reference Voltage did across the battery itself.\\ | + | as the Reference Voltage (battery, post to post).\\ |
Test with the BLACK meter probe on the frame, engine,\\ | Test with the BLACK meter probe on the frame, engine,\\ | ||
starter housing, handlebars, etc. Anywhere that should\\ | starter housing, handlebars, etc. Anywhere that should\\ | ||
- | be grounded should read the same as Refernce Voltage.\ | + | be grounded should read the same as the Refernce Voltage.\ |