Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:ref:genmsr01 [2019/04/23 07:50] ixl2relax [Basic Diagnosis - Won't Start] |
techtalk:ref:genmsr01 [2019/09/05 16:27] ixl2relax [Starter Won't Turn Over] |
||
|---|---|---|---|
| Line 63: | Line 63: | ||
| ===== Starter Won't Turn Over ===== | ===== Starter Won't Turn Over ===== | ||
| - | The place to start with any electrical problem is to make sure the battery is in good shape & your ground connections are solid. Go to this section of the Sportsterpedia and [[techtalk:evo:elec01|Verify Voltages & Grounds]]. The return here if all that checks out. | + | The place to start with any electrical problem is to make sure the battery is in good shape & your ground connections are solid. Go to this section of the Sportsterpedia and [[techtalk:evo:elec01|Verify Voltages & Grounds]]. If all that checks out, then return here to follow the rest of these tests. |
| If the engine/starter will not turn over at all and you have verified both voltage & grounds are good, then you need to trace the voltage to the starter. Use your volt meter on the 20v DC scale and begin checking each of the following points. This is a general overview (for any bike) of the path that power takes to reach the starter motor. | If the engine/starter will not turn over at all and you have verified both voltage & grounds are good, then you need to trace the voltage to the starter. Use your volt meter on the 20v DC scale and begin checking each of the following points. This is a general overview (for any bike) of the path that power takes to reach the starter motor. | ||
