Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:ref:genmsr02 [2019/09/25 06:01] hippysmack [Where to read them] |
techtalk:ref:genmsr02 [2019/11/14 06:56] hippysmack [Where to read them] |
||
---|---|---|---|
Line 75: | Line 75: | ||
We are only concerned with a good sound engine for fine tuning purposes. \\ | We are only concerned with a good sound engine for fine tuning purposes. \\ | ||
- | For reading WOT position, inspect the positive electrode and the last 1/4 of the ceramic insulator. \\ | + | For reading WOT position, inspect the positive electrode and the last 1/4 of the ceramic insulator. ((http://www.keihincarbs.com/tips/gate.html)) \\ |
Best power will usually result in a very light tan colored insulator tip and dark colored ring around the tip of the electrode. \\ | Best power will usually result in a very light tan colored insulator tip and dark colored ring around the tip of the electrode. \\ | ||
The electrode itself should have fairly sharp edges. \\ | The electrode itself should have fairly sharp edges. \\ | ||
Example: \\ | Example: \\ | ||
- | If the ceramic insulator has a nice tan coloring but the electrode has a white ring around the tip (and plug is in correct heat range); | + | If the ceramic insulator has a nice tan coloring but the electrode has a white ring around the tip (and plug is in correct heat range), then you can easily run a size larger main jet. \\ |
- | Then you can easily run a size larger main jet. \\ | + | |
====== How to Read Them ====== | ====== How to Read Them ====== | ||
\\ | \\ |