Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
techtalk:ref:oil05h [2023/12/23 01:15] hippysmack |
techtalk:ref:oil05h [2023/12/23 02:45] (current) hippysmack [REF: Oiling & Lubrication - Sub-05G] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| [[:techtalk:menu|{{ :techtalk:gototechnicalmenu.jpg|}}]] | [[:techtalk:menu|{{ :techtalk:gototechnicalmenu.jpg|}}]] | ||
| - | ====== REF: Oiling & Lubrication - Sub-05G ====== | + | ====== REF: Oiling & Lubrication - Sub-05H ====== |
| ====== norseXL's 1986 Engine Oiling Mods ====== | ====== norseXL's 1986 Engine Oiling Mods ====== | ||
| Article by norseXL of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/frame-mount-evo-sportster-talk-1986-2003-models/131026-my-mods-to-venting-and-oiling?t=1386341)) \\ | Article by norseXL of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/frame-mount-evo-sportster-talk-1986-2003-models/131026-my-mods-to-venting-and-oiling?t=1386341)) \\ | ||
| Line 6: | Line 6: | ||
| Normally, when the oil pressure regulator opens to purge excess pressure from the filter pad, the oil is routed thru a hole in the pad and into the gearcase. \\ | Normally, when the oil pressure regulator opens to purge excess pressure from the filter pad, the oil is routed thru a hole in the pad and into the gearcase. \\ | ||
| The regulator can open at various times and even get stuck in the open position while continuously dumping feed oil before it goes into the motor. \\ | The regulator can open at various times and even get stuck in the open position while continuously dumping feed oil before it goes into the motor. \\ | ||
| - | See also [[techtalk:ref:oil05e|86-90 Oil Filter Mount Mods]] in the Sportsterpedia. \\ | + | See also [[techtalk:ref:oil05e|1986-1990 Oil Filter Mount Mods]] in the Sportsterpedia. \\ |
| With this mod, you can render the affects of the pressure regulator inoperative while leaving the plunger and spring in place in the filter pad. | With this mod, you can render the affects of the pressure regulator inoperative while leaving the plunger and spring in place in the filter pad. | ||
