Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ref:oil07 [2019/02/06 04:24]
hippysmack [Oil Filter Fitment]
techtalk:ref:oil07 [2019/02/06 04:38] (current)
hippysmack [Filter Fitment]
Line 113: Line 113:
  
 ====== Filter Fitment ====== ====== Filter Fitment ======
 +In April of 1995, the MoCo issued a Tech Tip stating: ((HD Technical Tips #42 dated April of 1995 pg 1)) \\
 +When replacing oil filters during service intervals; \\
 +Check that the oil filter adapter has a sufficient amount of threads protruding to properly engage the filter. \\
 +The correct thread length should be 0.45"​-0.52"​ \\
 +
 +The MoCo issued a Tech Tip on Oil Filter Fitment((HD Technical Tips #43 dated Sept of 1995)) \\
 +Remember to check the oil filter adapter to ensure that it is tight. \\
 +Any loose adapters should be removed, cleaned, threads coated with 242 Loctite and installed to correct thread height (as above) \\
 +
 +
 In September of 1995, the MoCo issued a Tech Tip on oil filter fitment. ((HD Technical Tips #43 dated Sept of 1995)) \\ In September of 1995, the MoCo issued a Tech Tip on oil filter fitment. ((HD Technical Tips #43 dated Sept of 1995)) \\