Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:oil17 [2019/06/23 04:14]
hippysmack
+++ techtalk:ref:oil17 [2019/06/23 04:23]
hippysmack
@@ Line 63: / Line 63: @@
 |{{:techtalk:ih:oil:running_copper_oil_lines_10_by_sifty.jpg?direct&300|}}|{{:techtalk:ih:oil:running_copper_oil_lines_11_by_sifty.jpg?direct&300|}}|{{:techtalk:ih:oil:running_copper_oil_lines_12_by_sifty.jpg?direct&300|}}|
+====== Make Your Own Custom Oil Pump Hose  ======
+===== For 91-03 Sportsters =====
+  * For roughly around $20, you can make (or have made) the hose from the oil pump to the filter housing. \\ You'll have to find a shop that has the proper equipment to make the crimp.
+  * **Parts include**:
+|(1) - Parker 43 Series \\ (10143-2-4)|1/8"x27 male NPTF rigid crimp fitting for 1/4" hose (Overall length - 1.80" / 46mm) ((https://www.hoseandfittingsetc.com/product/fittings/hose-fittings/parker-43-series/43-series-nptf-pipe-fittings))|
+|(1) - Parker 43 Series \\ (10643-5-4)|5/16" (1/2"x20 threads) female JIC 37° (straight) swivel crimp fitting for 1/4" hose (Overall length - 2.03" \ 52mm) ((https://www.hoseandfittingsetc.com/product/fittings/hose-fittings/parker-43-series/43-series-jic-fittings))|
+|(App. 6") length - Parker \\ (471TC-4-RL)|1/4" / 6.4mm hydraulic hose ((https://www.parker.com/literature/Hose%20Products%20Division/4480_B51.pdf)) 2-wire braided synthetic rubber hydraulic hose. \\ Approved for 43 Series fittings, Min bend radius (2" \ 50 mm), ID (1/4" / 6.3mm), OD (0.51" / 13mm) \\ Rated pressure (5800 psi \ 40.0 MPa), ratings (USCG HF / DNV / ABS / MSHA Accepted) \\ Working oil temp (-40 to +212°F / -40 to +100°C), Weight (.2 lbs/ft / .3 kg/m ((https://www.mrostop.com/471tc-4-rl-parker-tough-cover-hydraulic-hose-1-4-in-5800-psi.html)) ((https://www.parker.com/literature/Hose%20Products%20Division/4480_B51.pdf))|
+Click on a pic to enlarge:
+|{{:techtalk:ref:oil:oil_pump_hose_1_by_lenc.jpg?direct&400|}}|{{:techtalk:ref:oil:oil_pump_hose_2_by_lenc.jpg?direct&400|}}|
+|  Custom oil pump hose made with Parker Hannifin fittings and hose ((photos courtesy of LenC of the XLFORUM http://xlforum.net/forums/showthread.php?t=2064612&page=4))  ||
+    * **Notes**:
+      * Stainless steel fittings must be assembled with a Karrykrimp 2, PHastkrimp, Superkrimp or Parkrimp 2 crimper per the manufacturer. These are very expensive tools thus finding a shop that is properly equipped is essential. ((https://www.hoseandfittingsetc.com/product/fittings/hose-fittings/parker-43-series/43-series-jic-fittings))
+\\
 \\
 [[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox