[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Oiling & Lubrication - Sub-22P ======
\\
====== 1977-Present Gerotor Oil Pump Capacities ======
^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&800|}}||||||||||||
|  1977-Up Sportster Oil Pump Volume in (US) Gallons per Minute (GPM)  ||||||||||||
|Year Model \\ Oil Pump →|  1977-1985  ||  1986-1990  ||  1991-1997  ||  1998-2006  ||  2007-Present  ||  \\ Oil \\ Pump \\ RPM ↓  |
|Engine \\ RPM ↓|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|:::|
|**1000**|.121|.346|.185|.346|.185|.346|.185|.485|.180|.782|  **500**|
|**1500**|.182|.519|.277|.519|.277|.519|.277|.727|.269|1.173|  **750**|
|**2000**|.242|.692|.370|.692|.370|.692|.370|.970|.359|1.564|  **1000**|
|**2500**|.303|.866|.462|.866|.462|.866|.462|1.212|.449|1.955|  **1250**|
|**3000**|.364|1.039|.555|1.039|.555|1.039|.555|1.454|.539|2.346|  **1500**|
|**3500**|.424|1.212|.647|1.212|.647|1.212|.647|1.697|.629|2.737|  **1750**|
|**4000**|.485|1.385|.740|1.385|.740|1.385|.740|1.940|.719|3.128|  **2000**|
|**4500**|.545|1.558|.832|1.558|.832|1.558|.832|2.182|.808|3.519|  **2250**|
|**5000**|.606|1.732|.925|1.732|.925|1.732|.925|2.424|.898|3.910|  **2500**|
|**5500**|.667|1.905|1.017|1.905|1.017|1.905|1.017|2.667|.988|4.301|  **2750**|
|**6000**|.727|2.078|1.110|2.078|1.110|2.078|1.110|2.909|1.078|4.692|  **3000**|
|**6500**|.788|2.251|1.202|2.251|1.202|2.251|1.202|3.152|1.132|5.083|  **3250**|
|**7000**|.845|2.424|1.294|2.424|1.294|2.424|1.294|3.394|1.257|5.474|  **3500**|
|**7500**|.909|2.597|1.387|2.597|1.387|2.597|1.387|3.636|1.347|5.865|  **3750**|

\\
The chart above is based on testing done by, Hippysmack, of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/203901-sportster-oil-pressure-and-dynamics?t=2081199)). Overall oil pump volume was calculated by measuring the volume of one tooth cavity in used oil pumps and calculating volume against RPM. The figures take into account that the oil pump turns 1/2 the speed of the engine. [[techtalk:ref:oil22|Click Here]] for the full testing and procedure used in the Sportsterpedia. **NOTE**: The figures in the chart represent 100% pump efficiency and DO NOT take into account any amount of internal pump leakage.
Internal leakage (or slippage) is an inherent condition of these pumps and WILL affect total volume output. Real world GPM will be lower than what is listed above. \\

**Figures used for chart**: \\
Volume (ci³) of 1 tooth cavity x volume (ci³) of 8 teeth (per 1 pump revolution) x RPM / 231 = GPM \\
**Note**: Pump speed is on the right side of the chart (do not calculate engine speed). \\
Engine speed is given above but not used for calculations. \\

  * 1977-1985 Feed Gerotor Volume per 1 pump revolution: 0.056 ci³  x RPM / 231
  * 1986-2006 Feed Gerotor Volume per 1 pump revolution: 0.0854332417326252 ci³ x RPM / 231
  * 2007-Present Feed Gerotor Volume per 1 pump revolution:0.0829922919688359 ci³ x RPM / 231
  * 1977-1997 Return Gerotor Volume per 1 pump revolution: 0.16 ci³ x RPM / 231
  * 1998-2006 Return Gerotor Volume per 1 pump revolution: 0.224 ci³ x RPM / 231
  * 2007-Present Return Gerotor Volume per 1 pump revolution: 0.3612605650408151 ci³ x RPM / 231


\\
\\


[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]