Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
techtalk:ref:priclutch02 [2024/01/19 23:38]
hippysmack
techtalk:ref:priclutch02 [2024/01/21 05:00] (current)
ixl2relax [Upgrade Clutch Release Bearing - HD P/N 8885 to 7200B Angular Ball Bearing]
Line 271: Line 271:
 https://​www.xlforum.net/​forum/​sportster-motorcycle-forum/​sportster-motorcycle-drivetrain/​sportster-motorcycle-transmission-clutch-primary-secondary-drive/​157723-clutch-squeal-bad-throwout-bearing?​t=1688139 https://​www.xlforum.net/​forum/​sportster-motorcycle-forum/​sportster-motorcycle-drivetrain/​sportster-motorcycle-transmission-clutch-primary-secondary-drive/​157723-clutch-squeal-bad-throwout-bearing?​t=1688139
  
-XLForum member '​Bikervation'​ has created a [[https://​youtu.be/​7BFSrilNk5Q|utube video]] of replacing this bearing. In it he uses a 17mm & 30mm socket to remove the old bearing and a 22mm socket to install the new bearing. ​Thease ​are used as presses, not socket wrenches during the procedure. You will benefit from viewing the actual process.+XLForum member '​Bikervation'​ has created a [[https://​youtu.be/​7BFSrilNk5Q|utube video]] of replacing this bearing. In it he uses a 17mm & 30mm socket to remove the old bearing and a 22mm socket to install the new bearing. ​These are used for pressing, not as socket wrenchesduring the procedure. You will benefit from viewing the actual process.