Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:priclutch03 [2019/06/11 21:01]
hippysmack [Energy One]
— (current)
Line 1: Line 1:
-[[:​techtalk:​menu|{{ ​ :​techtalk:​gototechnicalmenu.jpg|}}]] 
-====== REF: Primary Drive & Clutch ====== 
  
-\\ 
- 
-====== Aftermarket Clutch Packs ====== 
-====== 91 and Later Sportsters ====== 
-===== Energy One ===== 
- 
-**BTX-11**: \\ 
-9 Kevlar friction plates, 8 steel plates plus a 15% stronger diaphragm spring. ((https://​www.energyoneclutches.com/​clutchinfo/​BTX11.pdf)) \\ 
-**Recommended fluid type**: \\ The use of synthetics is not recommended as they tend to cause slippage. ((https://​www.energyoneclutches.com/​clutchinfo/​BTX11.pdf)) 
-  * Any HD petroleum based, non-synthetic,​ primary oil, as light weight as possible. 
-  * Or even a good petroleum based motor oil such as 10/40 or 20/50 in weight. 
-  * You can even use ATF Type F or B&M Trickshift. 
- 
-**Installation**:​ \\ 
-Start with a friction plate and end with a friction plate. ((https://​www.energyoneclutches.com/​clutchinfo/​BTX11.pdf)) \\ 
-The OEM rivet plate is discarded and not used with this kit. \\ 
-This kit includes 1 extra friction and steel plate to retain the OEM stack height. 
- 
-|  Energy One BTX-11 ​ ((photo by SarahColt of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=4809249#​post4809249)) ​ |  Soaking the plates in oil ((photo by chris_b_owens of the XLFORUM http://​xlforum.net/​forums/​showthread.php?​p=5072316))|  ​ 
-|{{:​techtalk:​ref:​priclutch:​energy_one_clutch_pack_by_sarahcolt.jpg?​direct&​300|}}|{{:​techtalk:​ref:​tools:​soaking_new_cluch_plates_by_chris_b_owens.jpg?​direct&​300|}}| 
- 
- 
- 
-\\ 
- 
-[[:​techtalk:​menu|{{:​techtalk:​gototechnicalmenu.jpg|}}]]