Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
techtalk:ref:susp07 [2018/08/13 22:27]
ixl2relax
techtalk:ref:susp07 [2018/08/13 22:28]
ixl2relax [More Links to XLF Suspension Threads]
Line 279: Line 279:
   * Spending the money for Intiminators is a good place to start, especially if you think your shocks are a bit too stiff. With the Intiminators,​ you might be able to reduce shock preload enough to make the shocks you have comfortable.   * Spending the money for Intiminators is a good place to start, especially if you think your shocks are a bit too stiff. With the Intiminators,​ you might be able to reduce shock preload enough to make the shocks you have comfortable.
   * If you really want to ride aggressively,​ you will have to add better tires, I like the Avon Venom X’s, fork brace, Intiminators with drilled out compression damping holes, Works Dual Rate springs and high end shocks. So far Ohlins are the only shock I have not heard any complaints about. However, Ricor is still working on their inertia shocks.   * If you really want to ride aggressively,​ you will have to add better tires, I like the Avon Venom X’s, fork brace, Intiminators with drilled out compression damping holes, Works Dual Rate springs and high end shocks. So far Ohlins are the only shock I have not heard any complaints about. However, Ricor is still working on their inertia shocks.
-===== The Famous Wobble Thread =====+====== The Famous Wobble Thread ​======
  
   * [[http://​xlforum.net/​forums/​showthread.php?​t=33294|The Famous XLF Wobble Thread]]   * [[http://​xlforum.net/​forums/​showthread.php?​t=33294|The Famous XLF Wobble Thread]]
Line 285: Line 285:
   * If you have wire spoked wheels, you can tap the spokes with a small wrench. If they make a ring sound, they are tight, if they make a thud sound, they are loose. Tightening spokes improperly can warp the rim, if you don't know what you're doing, take it to somebody who does.   * If you have wire spoked wheels, you can tap the spokes with a small wrench. If they make a ring sound, they are tight, if they make a thud sound, they are loose. Tightening spokes improperly can warp the rim, if you don't know what you're doing, take it to somebody who does.
  
-===== More Links to XLF Suspension Threads =====+====== More Links to XLF Suspension Threads ​======