Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:ref:tools035 [2021/08/22 07:01] hippysmack [External Bowed Locking Ring] |
techtalk:ref:tools035 [2021/08/26 20:54] hippysmack [Heavy Duty "E" Clips] |
||
|---|---|---|---|
| Line 324: | Line 324: | ||
| |D1500-19|25.50mm|19.0mm|1.85mm|1.75mm|36.70mm|15.92mm| | |D1500-19|25.50mm|19.0mm|1.85mm|1.75mm|36.70mm|15.92mm| | ||
| |D1500-24|31.50mm|24.0mm|2.05mm|2.00mm|43.65mm|21.88mm| | |D1500-24|31.50mm|24.0mm|2.05mm|2.00mm|43.65mm|21.88mm| | ||
| + | |||
| + | ====== Heavy Duty "E" Clips ====== | ||
| + | The chart below is a reprint from McMaster-Carr.com. Here is the [[https://www.mcmaster.com/retaining-rings/heavy-duty-side-mount-external-retaining-rings/|link to their web page]] . \\ | ||
| + | Some specs are left out for space. The chart below shows general sizing specs for Heavy E-clips. \\ | ||
| + | Check with the manufacturer for exact specs of the brand clips desired. \\ | ||
| + | |||
| + | Also known as reinforced E-style retaining rings, these rings are reinforced to withstand faster rotation than other side-mount retaining rings. \\ | ||
| + | Heavy E-clips have the same dims (fit in the same grooves as standard E-clips) but have a larger OD. \\ | ||
| + | The OD listed in part specs can be .040"-.080" larger depending on installed vs uninstalled specs given (some list either / or, some both). \\ | ||
| + | |||
| + | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}||||| | ||
| + | | **SAE Heavy Duty E-Clips** ||||| | ||
| + | |Shaft Size| Groove || Ring || | ||
| + | |:::|OD|Width|Installed OD|Thickness| | ||
| + | |3/32"|.074"|.02"|.206"|.015"| | ||
| + | |1/8"|.095"|.02"|.27"|.015"| | ||
| + | |5/32"|.116"|.029"|.335"|.025"| | ||
| + | |3/16"|.147"|.029"|.375"|.025"| | ||
| + | |7/32"|.188"|.029"|.446"|.025"| | ||
| + | |1/4"|.21"|.029"|.516"|.025"| | ||
| + | |5/16"|.25"|.029"|.588"|.025"| | ||
| + | |3/8"|.303"|.039"|.66"|.035"| | ||
| + | |7/16"|.343"|.039"|.746"|.035"| | ||
| + | |1/2"|.396"|.046"|.81"|.042"| | ||
| + | |9/16"|.437"|.046"|.87"|.042"| | ||
| ====== External Bowed Locking Ring ====== | ====== External Bowed Locking Ring ====== | ||
| + | The chart below is a reprint from ROTORCLIP.COM. Here is the [[https://www.rotorclip.com/cat_pdfs/el.pdf|link to the full PDF]]. \\ | ||
| + | Some specs are left out for space. The chart below shows general sizing specs for Bowed Retainer Clips. \\ | ||
| + | Check with the manufacturer for exact specs of the brand clips desired. \\ | ||
| - | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}|||||||||||||||| | + | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&820|}}||||||||||||||||| |
| - | | **External Bowed Locking Ring** |||||||||||||||| | + | | **External Bowed Locking Ring** ||||||||||||||||| |
| - | |Rotorclip \\ Part#| Shaft Diameter ||| Groove Size ||||| Ring Size ||||||| | + | |Rotorclip \\ Part#| Shaft Diameter ||| Groove Size ||||| Ring Size |||||||| |
| - | |:::|:::||| Diameter || Width || Depth | Length || Thickness || Bow \\ Height | Gap || | + | |:::|:::||| Diameter || Width || Depth | Length || Thickness || Bow \\ Height || Gap || |
| - | |:::|Dec|Tol|Fract|OD|Tol|Width|Tol|Depth|Length|Thickness|Tol|BH|Tol|Gap|Tol| | + | |:::|Dec|Tol|Fract|OD|Tol|W|Tol|D|L|Tol|T|Tol|BH|Tol|Gap|Tol| |
| - | |EL-9|.092"|± .002"|3/32"|.061"|±.001"|.035"| + .005" \\ - .000" |.016"|.307"|.010"|± .001"|.050"|±.010"|.063"|± .004"| | + | |EL-9|.092"| ± .002" |3/32"|.061"| ±.001" |.035"| + .005" \\ - .000" |.016"|.307"| ± .010" |.010"| ± .001" |.050"|±.010"|.063"|± .004"| |
| - | |EL-12|.125"|± .002"|1/8"|.082"|± .0015"|.035"| + .005" \\ - .000" |.021"|.307"|± .010"|± .001"|.050"|±.010"|.086"|± .004"| | + | |EL-12|.125"| ± .002" |1/8"|.082"| ± .0015" |.035"| + .005" \\ - .000" |.021"|.307"| ± .010" |.010"| ± .001" |.050"|±.010"|.086"|± .004"| |
| - | |EL-18| | + | |EL-18|.188"| ± .003" |3/16"|.124"| ± .002" |.045"| + .005" \\ - .000" |.032"|.390"| ± .010" |.015"| ± .002" |.060"| ± .010" |.130"| ± .005" | |
| - | |EL-25| | + | |EL-25|.250"| ± .003" |1/4"|.165"| ± .002" |.055"| + .005" \\ - .000" |.042"|.500"| ± .010" |.015"| ± .002" |.070"| ± .010" |.172"| ± .005" | |
| - | |EL-31| | + | |EL-31|.312"| ± .003" |5/16"|.228"| ± .003" |.080"| + .005" \\ - .000" |.042"|.620"| ± .010" |.015"| ± .002" |.095"| ± .010" |.234"| ± .005" | |
| - | |EL-37| | + | |EL-37|375"| ± .003" |3/8"|.270"| ± .003" |.095"| + .005" \\ - .000" |.052"|.740"| ± .010" |.020"| ± .002" |.130"| ± .010" |.280"| ± .005" | |
