Table of Contents
REF: Tools - 125
Cylinders
IH Cylinder Base Nut
 |
| Crows foot for the 9/16“ base nut. If you grind down a crows foot like this, it works quite well, 1) |
|---|
Measuring Cylinder Bore
 |  |
| Telescoping bore gauge and caliper for measuring cylinder I/D. 2) | |
|---|---|
Boring / Honing
Cylinder Hone
 |
| Lisle 15000 Cylinder Hone 3) |
|---|
Torque Plates
These are used to compress Evo Sportster cylinders for boring or to “installed” condition before measuring bore size or sizing rings.
There are multiple hole patterns for use on other model HDs also.
 |  |  |
| OEM torque plates (33446) 6) | ||
|---|---|---|