Table of Contents
This is an old revision of the document!
REF: Tools - 125
Cylinders
IH Cylinder Base Nut
Crows foot for the 9/16“ base nut. If you grind down a crows foot like this, it works quite well, 1) |
Measuring Cylinder Bore
Telescoping bore gauge and caliper for measuring cylinder I/D. 2) |
---|
Boring / Honing
1)
photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586
2)
phoros by Horseman1 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1943121&page=7
3)
photo by spamer80 of the XLFORUM http://xlforum.net/forums/showthread.php?t=2070501&page=16
4)
photo by Hippysmack