Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:tools129 [2019/04/08 20:57]
hippysmack
techtalk:ref:tools129 [2024/01/24 02:48] (current)
hippysmack
Line 5: Line 5:
 ===== To Gap the Spark Plugs ===== ===== To Gap the Spark Plugs =====
  
-|A small stainless plate 7/8" long by 3/8" wide and .040" thick with a \\ hole in it. It can be kept on a key ring and instead of keeping a feeler ​\\ gauge on your bike. ((Deep Diver of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=395586&​page=5))| +A small stainless plate 7/8" long by 3/8" wide and .040" thick with a hole in it. \\ 
-|{{techtalk:​ref:​tools:​homemade-spark-plug-feeler-gauge_by_deep_diver.jpg?​direct&​400|}}| +It can be kept on a key ring and instead of keeping a feeler gauge on your bike. ((Deep Diver of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​63858-special-tools/​page5?​t=395586&​page=5)) ​\\ 
-^  Homemade Spark Plug Gapping Tool ((photo by Deep Diver of the XLFORUM ​http://​xlforum.net/​forums/showthread.php?​t=395586&​page=5)) ​ ^+|{{techtalk:​ref:​tools:​homemade-spark-plug-feeler-gauge_by_deep_diver.jpg?​direct&​300|}}| 
 +^  Homemade Spark Plug Gapping Tool ((photo by Deep Diver of the XLFORUM ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-era-specific-and-model-specific/​ironhead-sportster-motorcycle-talk-1957-1985/​63858-special-tools/​page5?​t=395586&​page=5))  ^ 
 + 
 +This tool is not scientific and it's use is subjective. But it is widely used for gapping plugs. ((Hippysmack)) 
 +|{{:​techtalk:​ref:​tools:​spark_plug_gapper_by_hippysmack.jpg?​direct&​300|}}| 
 +^  Commercial spark plug gapping tool. ((photo by Hippysmack))  ^
  
 ===== Flexible Extension for Dual Plug Heads ===== ===== Flexible Extension for Dual Plug Heads =====
 +Care should be taken when installing the top spark plug on S models or any with dual plug heads. \\
 +It's easy to get into the wrong position and break the end of the plug with a conventional wrench. \\
 +
 +This flexible extension allows you to maneuver the plug into the hole using the handle on the end to start the threads without much force. \\
 +This was once available at most auto parts stores and is still available online. \\
 +If the plug doesn'​t thread easily, the grip will slip on the plug instead of forcing the threads together and cross-threading them. \\
 +Then you simply back it out, re-position and try again until the threads are started correctly. \\
 +Once the threads are started, remove the flex tool, use a conventional plug wrench to snug up and then a torque wrench for final tightening. \\
  
 +|  STEELMAN PRO 08310R flexible 12-Inch spark plug starter tool ((photos by Hippysmack)) ​ |||
 +|{{:​techtalk:​ref:​tools:​flexible_spark_plug_extension_1_by_hippysmack.jpg?​direct&​300|}}|{{:​techtalk:​ref:​tools:​flexible_spark_plug_extension_2_by_hippysmack.jpg?​direct&​300|}}|{{:​techtalk:​ref:​tools:​flexible_spark_plug_extension_3_by_hippysmack.jpg?​direct&​300|}}|
  
 \\ \\