[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Tools - 132 ======

====== Shop Press ======

|{{:techtalk:ref:tools:homemade_shop_press_1_by_billeuze.jpg?direct&300|}}|{{:techtalk:ref:tools:homemade_shop_press_2_by_billeuze.jpg?direct&300|}}|
|Can be made from whatever you find at the scrap yard, this was made from steel channel bolted to the 2x4s. \\ Then, a couple pieces of steel bolted to the bottom of the bottle jack (one with a hole in the center of the jack \\ to hold a 3/8" socket drive to which I can attach whatever size socket or adapter needed to press on a \\ bearing). Then under that is another piece of steel to spread the load a bit ((billeuze of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/63858-special-tools/page6?t=395586&page=6))||
^  Homemade Shop Press ((photos by billeuze of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/63858-special-tools/page6?t=395586&page=6))  ^^


\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]