• For removing the oil filter:

¹⁾

• Basically you can use whatever you have close at hand. It is definitely better to avoid the spilled oil on the bike. ²⁾
• The carb board and paper trick just might end up in the dump polluting the water system. ³⁾
• Most any empty plastic bottle with sufficient length to bring the oil away from the bike can be cut out as a decent funnel.
• Just cut out one side of the container, leave the cap off and let it drain into a drip pan / container.
• Examples range from:
  • A small plastic milk jug. ⁴⁾
  • A tall cut out 1 litre shampoo bottle. ⁵⁾

A Used and Cutout Oil Bottle 6)	A Piece of Rain Gutter 7)