Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:tools145 [2019/07/19 02:15]
hippysmack [Retaining Rings]
+++ techtalk:ref:tools145 [2019/07/19 02:59]
hippysmack [Oil Pump Removal]
@@ Line 22: / Line 22: @@
 |{{:techtalk:ref:tools:precision_cuticle_scissors_4_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:precision_cuticle_scissors_5_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:precision_cuticle_scissors_6_by_hippysmack.jpg?direct&300|}}|
-|There are 4 bolts on the 77 and Up gerotor oil pump. But only 2 are used to bolt the pump to the engine \\ (front outside and rear inside). The Allen head cap bolts have 1/4"x20 threads and a 3/16" socket head. The \\ front bolt can be removed / installed with a regular size Allen wrench but the rear bolt is inside the frame. So \\ you have to go between the frame and the engine to get to that bolt. A regular size Allen wrench is very \\ difficult to use as the 90° bend on the end hits the frame /engine. \\ This 3/16"x6" Allen socket makes the job a lot easier.||
+====== Oil Pump Removal ======
+Mounting bolts (to the engine): \\
+-97 models - (4 bolts) \\
+-Up - (2 bolts - front outside and rear inside) \\
+The Allen head cap bolts have 1/4"x20 threads and a 3/16" socket head. \\
+On 98-Up pumps, the front bolt can be removed / installed with a regular size Allen wrench but the rear bolt is inside the frame. \\
+So you have to go between the frame and the engine to get to that bolt. \\
+A regular size Allen wrench is very difficult to use as the 90° bend on the end hits the frame /engine. \\
+This 3/16"x6" Allen socket makes the job a lot easier. \\
+The Allen wrench doesn't have to be 6" long. This one simply gives you more room to work. \\
 |{{:techtalk:ref:tools:77-85_oil_pump_allen_wrench_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:77-85_oil_pump_allen_wrench_2_by_hippysmack.jpg?direct&300|}}|

Trace:

Differences

Navigation

Search

Toolbox