Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
techtalk:ref:tools145 [2019/12/20 21:31] hippysmack [Oil Pump Check Ball Seat Lapping Tool] |
techtalk:ref:tools145 [2019/12/20 21:32] hippysmack [Oil Pump Check Ball Seat Lapping Tool] |
||
---|---|---|---|
Line 11: | Line 11: | ||
===== Oil Pump Check Ball Seat Lapping Tool ====== | ===== Oil Pump Check Ball Seat Lapping Tool ====== | ||
- | **The tool on the left** is a homemade check ball lapping tool used to lap the seat where the check ball sits in the oil pump (57-76). \\ | + | **The tool on the left** is a homemade check ball lapping tool used to lap the seat where the check ball sits in the oil pump (57-76). ((Toolmaker of the XLFORUM http://xlforum.net/forums/showthread.php?t=499487&highlight=check+ball+lapping+tool)) \\ |
It's made with a tool steel shank and a 3/8" carbide ball tip on the end. \\ | It's made with a tool steel shank and a 3/8" carbide ball tip on the end. \\ | ||
The pocket for the ball to sit was cut with a 3/8" ball end mill then a few drops of Loctite 404 to keep it there. \\ | The pocket for the ball to sit was cut with a 3/8" ball end mill then a few drops of Loctite 404 to keep it there. \\ | ||
- | **The tool on the right** is a check-ball seat burnishing set. \\ | + | **The tool on the right** is a check-ball seat burnishing set. ((DaWind of the XLFORUM http://xlforum.net/forums/showthread.php?t=1013445&page=2)) \\ |
The idea is to turn the ball into the seat several times, thereby smoothing it to a very fine finish. \\ | The idea is to turn the ball into the seat several times, thereby smoothing it to a very fine finish. \\ | ||
It works quite well with these old check valve seats, but you can and do use quite a bit of force with the cast iron for a good result. \\ | It works quite well with these old check valve seats, but you can and do use quite a bit of force with the cast iron for a good result. \\ |