Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| techtalk:ref:tools159 [2018/12/16 18:10] – [Multimeter] hippysmack | techtalk:ref:tools159 [2024/01/24 22:39] (current) – hippysmack | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| [[: | [[: | ||
| ====== REF: Tools - 159 ====== | ====== REF: Tools - 159 ====== | ||
| - | ====== Multimeter ====== | + | ====== Multimeter |
| See also, [[techtalk: | See also, [[techtalk: | ||
| - | Multimeters are extremely useful and are pretty hardy. \\ | + | A multimeter or a multitester, |
| + | A typical multimeter can measure voltage, current, and resistance. \\ | ||
| + | Analog multimeters use a microammeter with a moving pointer to display readings. \\ | ||
| + | Digital multimeters (DMM, DVOM) have a numeric display, and may also show a graphical bar representing the measured value. \\ | ||
| + | Digital multimeters are now far more common due to their cost and precision, but analog multimeters are still preferable in some cases, for example when monitoring a rapidly varying value. \\ | ||
| + | |||
| + | A multimeter can be a hand-held device useful for basic fault finding and field service work, or a bench instrument which can measure to a very high degree of accuracy. ((https:// | ||
| + | They can be used to troubleshoot electrical problems in a wide array of industrial and household devices such as electronic equipment, motor controls, domestic appliances, power supplies, and wiring systems. \\ | ||
| + | |||
| + | Multimeters are available in a wide range of features and prices. ((https:// | ||
| + | Cheap multimeters can cost less than US$10, while laboratory-grade models with certified calibration can cost more than US$5,000. | ||
| + | |||
| + | |||
| + | Multimeters are extremely useful and are pretty hardy. | ||
| But using the wrong setting, wrong scale, or performing the wrong type of measurement will at best give meaningless results, and at worst smoke the meter. \\ | But using the wrong setting, wrong scale, or performing the wrong type of measurement will at best give meaningless results, and at worst smoke the meter. \\ | ||
| Line 18: | Line 31: | ||
| * The values may move a little, but generally they will fluctuate around a meaningful value if the contact point is solid. | * The values may move a little, but generally they will fluctuate around a meaningful value if the contact point is solid. | ||
| - | | [[techtalk: | + | | |
| - | |{{:techtalk: | + | |{{techtalk: |
| + | |||
| + | ====== Probe Mod ====== | ||
| + | |||
| + | You can buy a couple alligator clips from an auto parts / electronic store and gently crimp the ends over the end of the straight probes. \\ | ||
| + | This will allow you to clip onto pinouts for testing. \\ | ||
| + | You can also lightly wrap electrical tape over the assembly for working in areas where the pins are close to each other so they don't make contact. \\ | ||
| + | {{: | ||
| \\ | \\ | ||