Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:tools168 [2019/09/11 05:10]
hippysmack
+++ techtalk:ref:tools168 [2019/11/10 14:59]
hippysmack
@@ Line 1: / Line 1: @@
 [[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
-====== REF: Tools - 167 ======
+====== REF: Tools - 168 ======
 ====== Dremil Type Rotary Tool ======
 A Dremil tool has many uses from cutting to polishing metal. Always wear a face shield when using this tool. \\
@@ Line 10: / Line 10: @@
 ====== Uses ======
 |Cutting slots in pipes for shields. ((photo by Graywolf of the XLFORUM http://xlforum.net/forums/showthread.php?t=2070881&page=3))|
 |{{:techtalk:ref:tools:heatshield_strap_by_graywolf.jpg?direct&300|}}|
+Usually, cutting the end off a bolt requires sanding / filing the cut area to deburr / chamfer the end. \\
+However, the Dremil tool cuts at a high speed with a thin cutting disc. \\
+Keep the cutting blade perpendicular to the threads while cutting and, most of the time, deburring the cut end is optional or at least minimal. \\
+There is no need to install a nut and back it off the threads as you would normally do when using a hack saw or grinder. \\
+|  Shortening a bolt. ((photos by Hippysmack))  |||
+|{{:techtalk:ref:tools:shortening_a_bolt_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:shortening_a_bolt_2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:shortening_a_bolt_3_by_hippysmack.jpg?direct&300|}}|
+|

Trace: