For use on all 1984 to present Evo Big Twin, XL, and Twin Cam models. (See the Sportsterpedia EVO Exhaust Section)
This tool installs the exhaust pipe seal H-D No. 65324-83B or Screamin’ Eagle No.17048-98 or equivalent exhaust gaskets.
It will position the gasket evenly into the head exhaust port thus preventing exhaust leaks.
Installation: 1)
You can toss the gaskets into the freezer for about a half hour to shrink them up a little before installing them.
A good hour or two works better but that still may not help much.
Then, carefully tap them into place with a 2×4 piece of wood and a hammer.
Try not to fold them over while seating them into the counterbore.
2×2 piece of wood used below… could have had better results with a 2×4.
4) 5)