Table of Contents
This is an old revision of the document!
REF: Wheels, Brakes & Tires
Axle/Bearing Spacers - Misc OEM Info
| For 3/4“ Axles | |
| Width | P/N |
|---|---|
| .300” | 43548-74 Stepped spacer |
| .380“ | 43358-83A |
| .440” | 43548-73 stepped spacer |
| .465“ | 43488-77 Stepped spacer |
| .506” | 41607-83 |
| .653“ | 41594-73 |
| .750” | 43654-86A |
| .930“ | 43617-95 - Speedo Drive Width |
| 1.00” | 43657-89 |
| 1.165“ | 41591-81 |
| 1.245” | 40915-94 |
| 1.250“ | 40910-84A |
| 1.340” | 43683-97 |
| 1.420“ | 43674-95 |
| For 1” Axles | |
| Width | P/N |
|---|---|
| .470“ | 43654-00 |
| .515” | 43617-00 |
| .887“ | 40910-00 |
| .986” | 43683-00 |
| 1.880“ | 41595-00 |
Homemade Axle Adjuster End Plate
If you break an adjuster end plate while your out riding, here is quick fix that might help get you home. Click on a pic to enlarge:
 |  |  |
| One large fender washer with a smaller one in front to keep the large one from bending. 1) | ||
1)
photos by welshturk of the XLFORUM http://xlforum.net/vbportal/forums/showthread.php?t=1935064&highlight=axle
