Table of Contents
This is an old revision of the document!
REF: Engine Mechanicals - Sub-05A
Installing a Catch Can on the Breather Vent Line
WD-40 Catch Can
An old WD-40 can with the top cut out to drop the vent line into.
The can vents to atmosphere.
1) 2)
Engine Breather Oil Collector (EBOC) System
Designed and sold by RW COMPANY'S BIKE STUFF 3).
Here's a video from the maker on how to install it.
This one is installed with the addition of one 5/16“ hole in the sprocket cover, some 3/8” hose, and a brass tee. 4)
It's basically a catch can with a filter on the top.
5) 6) 7)
1)
, 2)
photo by DaytonaSportster of the XLFORUM http://xlforum.net/forums/showthread.php?t=72099&highlight=wet+sumping&page=27
3)
RW COMPANY'S BIKE STUFF 4700 Old Highway 279 in Camp Verde, AZ (928) 567-5245
4)
pearlmoto of the XLFORUM http://xlforum.net/forums/showthread.php?t=1751615&page=3