Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
techtalk:evo:engctl02 [2020/10/07 07:22] ixl2relax [Starter & Solenoid Function] |
techtalk:evo:engctl02 [2022/04/10 01:55] ixl2relax [Starter & Solenoid Function] |
||
|---|---|---|---|
| Line 56: | Line 56: | ||
| * 20amps pulled thru the Starter Relay (to the Starter Solenoid Coil) | * 20amps pulled thru the Starter Relay (to the Starter Solenoid Coil) | ||
| * 200amps pulled thru the Starter Solenoid Hi-Current Contacts\\ (to the Starter Motor when engaged with the Ring Gear) | * 200amps pulled thru the Starter Solenoid Hi-Current Contacts\\ (to the Starter Motor when engaged with the Ring Gear) | ||
| + | * Also review this Sportsterpedia section: [[techtalk:evo:elec02#relays]] | ||
| {{:techtalk:evo:engctl:startercurrentdraw.jpg?450|}} | {{:techtalk:evo:engctl:startercurrentdraw.jpg?450|}} | ||
| Line 141: | Line 142: | ||
| Use another jumper wire from the NEGATIVE battery terminal to the case of the solenoid body and secure it well. | Use another jumper wire from the NEGATIVE battery terminal to the case of the solenoid body and secure it well. | ||
| - | **Double Check for Safety** - At this point, you should have no connection at the Battery Positive Post and no connection at Solenoid Connection 'A' - The jumper wires are connected to Solenoid connections 'C' and 'E' with a ground wire from the solenoid body connected to the NEGATIVE battery post. | + | **Double Check for Safety** - At this point, you should have no connection at the Battery Positive Post and no connection at Solenoid Connection 'A' - The jumper wires are connected to Solenoid connections 'C' and 'E' plus a ground wire from the solenoid body connected to the NEGATIVE battery post. |
| \\ | \\ | ||
