Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| techtalk:evo:oil04k [2021/04/01 20:50] – [How to Distinguish Between 1983-2001 Oil Tanks at a Glance] hippysmack | techtalk:evo:oil04k [2022/03/10 19:36] (current) – [How to Distinguish Between 1982-2001 Oil Tanks at a Glance] hippysmack | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| [[: | [[: | ||
| ====== EVO: Oiling & Lubrication - Sub-04K ====== | ====== EVO: Oiling & Lubrication - Sub-04K ====== | ||
| - | ====== How to Distinguish Between | + | ====== How to Distinguish Between |
| - | Click on any pic below to enlarge: \\ | + | |
| If you need a replacement or upgraded oil tank, it's good to know which one is which before you buy one. \\ | If you need a replacement or upgraded oil tank, it's good to know which one is which before you buy one. \\ | ||
| Line 14: | Line 13: | ||
| Below are the known //changes on the __rear__ of oil tanks// from 1983-2001. \\ | Below are the known //changes on the __rear__ of oil tanks// from 1983-2001. \\ | ||
| + | See this page [[techtalk: | ||
| - | **1983-1993 oil tank**: | + | * **1982 oil tank**: |
| - | * Standalone welded bracket on the front that mounts to the battery box. | + | * Standalone welded bracket on the front that mounts to the battery box. |
| - | * Uses the 2-hole battery box with the welded 1/2" nipple under it. | + | * Uses the 2-hole battery box with no welded 1/2" nipple under it. \\ The nipple is a drain hose plug and this tank has a drain plug screwed under the bottom of it. |
| - | * 4 oil line fittings | + | * 3 oil line fittings |
| - | * Single threaded hole on the upper rear to mount the starter relay to the tank. | + | * Single threaded hole on the upper rear to mount the starter relay to the tank. |
| - | * Curved rear contour. | + | * Curved rear contour. |
| + | * There is no wiring bracket welded to the top. | ||
| + | * **1983-1993 oil tank**: | ||
| + | * Looks almost identical to the 82 oil tank. | ||
| + | | ||
| + | * Uses the 2-hole battery box with the welded 1/2" nipple under it. The nipple is to terminate the drain plug. | ||
| + | * 4 oil line fittings | ||
| + | * Single threaded hole on the upper rear to mount the starter relay to the tank. | ||
| + | * Curved rear contour. | ||
| + | * There is no wiring bracket welded to the top. | ||
| + | | ||
| + | * Wider front bracket for mounting the battery box. \\ Bracket has arms welded to the tank extending to the two front tank to frame rubber mount holes. | ||
| + | * One piece rear bracket with 2 mounting holes for battery tray. Uses the 3-hole battery box. | ||
| + | * Only has 3 oil line fittings near on the bottom of the tank. | ||
| + | * Still has the threaded hole on the upper rear for 82-93 starter relay even though the relay was moved elsewhere in 94. | ||
| + | | ||
| + | * Has a thin bracket mounted on top near the rear of the tank for a wire holder. | ||
| + | * Can be used on 82-93 models paired with the 3 hole battery tray. However, the feed/drain hose may be a tight fit against the frame. | ||
| + | * **1997-1999 oil tank**: | ||
| + | * Looks basically the same as the 94-96 oil tank. | ||
| + | * Wide front bracket for mounting the battery box. \\ Bracket has arms welded to the tank extending to the two front tank to frame rubber mount holes. | ||
| + | * One piece rear bracket with 2 mounting holes for battery tray. Uses the 3-hole battery box with rubber bumpers on the back wall. | ||
| + | * 3 oil line fittings on or near the bottom of the tank. | ||
| + | * Still has the threaded hole on the upper rear for 82-93 starter relay even though the relay was moved elsewhere in 94. | ||
| + | * Curved rear contour. | ||
| + | * Feed/drain hose is curved toward the front to give more clearance between the hose and frame. | ||
| + | * Has a wider bracket mounted on top near the rear of the tank with a hole in the middle of it for a wire clip. \\ There is a rubber plug that goes in that hole on 1200S models. | ||
| + | * Can be used on 82-93 models paired with the 3 hole battery tray. | ||
| + | * **1994-1999 updated oil tank**: | ||
| + | * New version oil tank for 94-99 models (and 82-93 models with the addition of the 94-up, 3 hole battery tray) | ||
| + | * It's basically the same as the 2000-2003 oil tank with an added threaded hole in the back for the 83-93 starter relay. | ||
| + | * Requires the 3 hole battery tray. | ||
| + | * Boxed rear panel design for added strength and less flex with a boxed rear contour. | ||
| + | * The front battery tray mount was redesigned with a standalone welded bracket (wider base than on 83-93 tanks). | ||
| + | * Rear battery tray mounts are standalone welded studs with female threads. | ||
| + | * Has the wide bracket mounted on top near the rear of the tank with a hole in the middle of it for a wire clip. \\ There is a rubber plug that goes in that hole on 1200S models. | ||
| + | * **2000-2003 oil tank**: | ||
| + | * The threaded hole for the 82-93 starter relay was deleted. | ||
| + | * Requires the 3 hole battery tray. | ||
| + | * Boxed rear panel design for added strength and less flex with a boxed rear contour. | ||
| + | * The front battery tray mount was redesigned with a standalone welded bracket (wider base than on 83-93 tanks). | ||
| + | * Rear battery tray mounts are standalone welded studs with female threads. | ||
| + | * Using this tank on pre-94 models also requires alternate location for starter relay. | ||
| + | * Has a wide bracket mounted on top near the rear of the tank with a hole in the middle of it for a wire clip. \\ There is a rubber plug that goes in that hole on 1200S models. | ||
| - | **1994-1996 oil tank**: | + | Pics of battery trays: \\ |
| - | * Wider front bracket for mounting the battery box. \\ Bracket has arms welded to the tank extending to the two front tank to frame rubber mount holes. | + | * [[techtalk: |
| - | * One piece rear bracket with 2 mounting holes for battery | + | * [[techtalk: |
| - | * Only has 3 oil line fittings near on the bottom of the tank. | + | |
| - | * Still has the threaded hole on the upper rear for 83-93 starter relay even though the relay was moved elsewhere in 94. | + | |
| - | * Curved rear contour. | + | |
| - | **1997-1999 oil tank**: | + | **Pics of the rear defining characteristics of the tanks**. \\ |
| - | * Looks basically | + | Click on any pic below to enlarge: \\ |
| - | | + | |
| - | * One piece rear bracket with 2 mounting holes for battery tray. Uses the 3-hole battery box with rubber bumpers | + | |
| - | * 3 oil line fittings on or near the bottom of the tank. | + | |
| - | * Still has the threaded hole on the upper rear for 83-93 starter relay even though the relay was moved elsewhere in 94. | + | |
| - | * Curved rear contour. | + | |
| - | * Feed/drain hose is curved toward the front to give more clearance between the hose and frame. | + | |
| - | {{: | + | {{: |
| {{: | {{: | ||
| + | \\ | ||
| + | \\ | ||
| + | **Pics of the wiring bracket welded to the top of the tank models near the rear (94-03 models only)**. \\ | ||
| + | |||
| + | {{: | ||
| + | |||
| + | {{: | ||
| \\ | \\ | ||
