(1973-90 Simple Turn Signal Function)
These model years HD implemented a basic turn signal circuit using a bi-metallic, current/heat-controlled, Turn Signal Flasher Unit similar to those in automobiles. The 12v power wire feeds thru the Flasher and then goes to the handlebar switches. The Left or Right handlebar turn signal switch could be pressed to feed the power to the bulbs on that side of the bike. When connected to the bulbs, thus completing the circuit, the Flasher unit would supply power until the current flowing through it would heat the bi-metallic elements sufficiently to cause a break (like a circuit breaker) in the circuit. Once the flasher cooled down, the bi-metallic elements would again conduct power to the turn signal bulbs, thus causing an on-off cycle that repeated until the handlebar switch was released.

From 1973-1981, the handlebar TS switches were small pushbuttons. They were momentary contact. The turn signal only stayed flashing while the button was depressed.
From 1982-1985, the handlebar TS housings were changed, creating a larger TS button. The switches were still momentary contact, working only while the button was depressed.