Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
techtalk:ih:engctl03b [2020/04/30 21:46] hippysmack [1977-1978 Kicker Cover Damage Repair] |
techtalk:ih:engctl03b [2023/12/31 18:50] (current) hippysmack |
||
---|---|---|---|
Line 3: | Line 3: | ||
====== 1977-1978 Kicker Cover Damage Repair ====== | ====== 1977-1978 Kicker Cover Damage Repair ====== | ||
- | Article by Hopper of the XLFORUM ((http://xlforum.net/forums/showthread.php?t=232588)) \\ | + | Article by Hopper of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit)) \\ |
- | This little bracket is the cure for broken sprocket covers and mountings on kickstart 1977 models. \\ | + | This little bracket is the cure for broken sprocket covers and mountings on kickstart 1977-1978 models. \\ |
- | It can also be fitted to pre-1977 models with minor modifications to the sprocket cover. \\ | + | |
It is standard equipment on 1978 kickstart models and was issued by HD as a retro fix kit for early 1977s. \\ | It is standard equipment on 1978 kickstart models and was issued by HD as a retro fix kit for early 1977s. \\ | ||
HD OEM part number for the spacer is (34848-77). \\ | HD OEM part number for the spacer is (34848-77). \\ | ||
+ | It's in the -78A and -78B Parts Catalog in the transmission sections under part# (34850-77) - SPROCKET COVER KIT. \\ | ||
+ | But the part number for the spacer is shown in the -78B catalog. \\ | ||
- | But they are not easy to find, so making one is a real option. \\ | + | They are not easy to find, so making the spacer is a real option. \\ |
It would just take two pieces of flat steel strap and a piece of 3/4" water pipe, some drilling and some welding. \\ | It would just take two pieces of flat steel strap and a piece of 3/4" water pipe, some drilling and some welding. \\ | ||
It basically bolts to the two rear engine mounting studs and sticks out around the kicker shaft so the cover can bolt to it. \\ | It basically bolts to the two rear engine mounting studs and sticks out around the kicker shaft so the cover can bolt to it. \\ | ||
Mid-77 models have the extra bolt hole in the cover. \\ | Mid-77 models have the extra bolt hole in the cover. \\ | ||
- | Earlier models will need a patch welding inside the cover and drilling. Easy enough to do. \\ | + | Earlier 77 models will need a patch welding inside the cover and drilling. Easy enough to do. \\ |
- | **Pics: The "spacer` as HD calls it**. \\ | + | **Pics: The "spacer" as HD calls it**. \\ |
- | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_1_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_2_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) \\ | + | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_1_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_2_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) \\ |
- | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_3_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_4_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) \\ | + | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_3_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_4_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) \\ |
+ | |||
+ | \\ | ||
**Installed on the bike**: \\ | **Installed on the bike**: \\ | ||
Line 29: | Line 32: | ||
The bracket itself seems good and solid. The tube is thick walled so will not flex. \\ | The bracket itself seems good and solid. The tube is thick walled so will not flex. \\ | ||
- | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_5_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_6_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) \\ | + | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_5_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_6_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) \\ |
+ | \\ | ||
- | **Dimensions of the spacer**: \\ | + | And here is the factory support bracket fix kit in place around the kick starter shaft. \\ |
- | A rough sketch I made by laying the part on paper and drawing around it, then measuring up. \\ | + | Also my extra support bracket on top of the gearbox casing, ready to bolt the sprocket on when it arrives and then the cover. \\ |
+ | Third pic is of the top bracket before I drilled and tip it in position. \\ | ||
+ | Nice welding job by my aircraft welder buddy there. \\ | ||
+ | |||
+ | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_13_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit/page2?t=232588&page=2)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_14_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit/page2?t=232588&page=2)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_15_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit/page2?t=232588&page=2)) \\ | ||
- | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_7_by_hopper.jpg?direct&700|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) \\ | ||
\\ | \\ | ||
- | |||
I shaped and had welded a piece of a 3/8" aluminium plate inside the sprocket cover. \\ | I shaped and had welded a piece of a 3/8" aluminium plate inside the sprocket cover. \\ | ||
And then drilled a hole for the spacer bracket mounting bolt to go through. \\ | And then drilled a hole for the spacer bracket mounting bolt to go through. \\ | ||
Covers before mid-77 will need this attachment point. Aftermarket covers for 77-78 will have this standard. \\ | Covers before mid-77 will need this attachment point. Aftermarket covers for 77-78 will have this standard. \\ | ||
+ | Third, pic: the modified sprocket cover, welded, filed down and drilled to suit the factory support bracket spacer. \\ | ||
+ | It is easier to just buy an aftermarket 1978 sprocket cover, it already has this in place. \\ | ||
- | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_8_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_9_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) \\ | + | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_8_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_9_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_16_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit/page2?t=232588&page=2)) \\ |
+ | |||
+ | \\ | ||
Then I made a big extra angle bracket to go from the bolt holes on top of the gearbox, over to support the top bolt on the sprocket cover. \\ | Then I made a big extra angle bracket to go from the bolt holes on top of the gearbox, over to support the top bolt on the sprocket cover. \\ | ||
Line 53: | Line 63: | ||
As well as this, I had my gearbox casing welded up and redrilled the wrecked original dowel holes, but I reckon that with these two brackets, that step might be optional. | As well as this, I had my gearbox casing welded up and redrilled the wrecked original dowel holes, but I reckon that with these two brackets, that step might be optional. | ||
- | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_10_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_11_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_12_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=232588)) \\ | + | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_10_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_11_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_12_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) \\ |
+ | |||
+ | And I did have to grind a little clearance on the factory spacer to allow for the oversize 22-tooth sprocket. \\ | ||
+ | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_17_by_hopper.jpg?direct&300|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit/page2?t=232588&page=2)) \\ | ||
+ | \\ | ||
+ | **Dimensions of the spacer**: \\ | ||
+ | A rough sketch I made by laying the part on paper and drawing around it, then measuring up. \\ | ||
+ | {{:techtalk:ih:engctl:1977-1978_kicker_cover_repair_7_by_hopper.jpg?direct&700|}} ((photo by Hopper of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/52379-sprocket-cover-kick-starter-damage-repair-kit?t=232588)) \\ | ||
+ | \\ | ||
\\ | \\ |