Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
techtalk:miscres:miscres90-terms:term-h [2018/06/04 02:16] hippysmack [Hammer] |
techtalk:miscres:miscres90-terms:term-h [2020/03/24 07:42] (current) ixl2relax ↷ Links adapted because of a move operation |
||
---|---|---|---|
Line 11: | Line 11: | ||
A thread repair insert used to repair stripped threads i.e. spark plug hole threads | A thread repair insert used to repair stripped threads i.e. spark plug hole threads | ||
===== High Thrust Grippers ===== | ===== High Thrust Grippers ===== | ||
- | Term used in a 1967 magazine add referring to the bead locking screws in the rear wheel on 67-69. ((Dr Dick http://xlforum.net/forums/showthread.php?t=1567534&page=3)) | + | Term used in a 1967 magazine ad referring to the bead locking screws in the rear wheel on 67-69. ((Dr Dick http://xlforum.net/forums/showthread.php?t=1567534&page=3)) |
===== Honing ===== | ===== Honing ===== | ||
A process using sanding stones or other abrasives to rough up cylinder walls after boring to help the rings seal. Also used with finer abrasives to achieve a final clearance dimension | A process using sanding stones or other abrasives to rough up cylinder walls after boring to help the rings seal. Also used with finer abrasives to achieve a final clearance dimension | ||
Line 18: | Line 18: | ||
===== Hooroo ===== | ===== Hooroo ===== | ||
Goodbye ((Moved On from the XLFORUM http://xlforum.net/forums/showthread.php?t=359)) | Goodbye ((Moved On from the XLFORUM http://xlforum.net/forums/showthread.php?t=359)) | ||
+ | |||
===== HT ===== | ===== HT ===== | ||
High Tension. Describes the electrical circuit from the secondary side of the ignition coil to the spark plug ((Haynes Sportster manual 1970-2010 pg REF*49)) | High Tension. Describes the electrical circuit from the secondary side of the ignition coil to the spark plug ((Haynes Sportster manual 1970-2010 pg REF*49)) | ||
+ | ===== HTFFSPTM ===== | ||
+ | This is a technical term that means: hammer to fit, file smooth, paint to match - (milmat1) | ||
===== HTHS (High Temperature High Shear) Viscosity ===== | ===== HTHS (High Temperature High Shear) Viscosity ===== | ||
A measure of a fluid’s resistance to flow under conditions resembling highly-loaded journal bearings in fired internal combustion engines, typically 1 million per second @ 150 °C.((http://www.oilspecifications.org/articles/lubrication-glossary.php)) | A measure of a fluid’s resistance to flow under conditions resembling highly-loaded journal bearings in fired internal combustion engines, typically 1 million per second @ 150 °C.((http://www.oilspecifications.org/articles/lubrication-glossary.php)) | ||
Line 38: | Line 41: | ||
\\ | \\ | ||
- | [[parts:partsplus-01g|{{:parts:gototerminologylist.jpg|}}]] | + | [[techtalk:miscres:miscres90|{{techtalk:miscres:gototerminologylist.jpg|}}]] |
\\ | \\ | ||