Table of Contents
This is an old revision of the document!
REF: Body Parts
Aftermarket Handlebars, Risers and Mods
Handlebars
- For those who are shopping around for different types of bars (with their measurements), this section will show an approximate view from the seat and the side of how the different bars look while installed. Looks can be deceiving however with different models, color backgrounds and perceptions.
1“ Drag Bars w/ stock risers and cables on a 2014 XL1200C - 30” wide, 6“ pullback, 8” center. 1) |
Risers
Riser Mods
Done on a 2005 1200R Using 3/4” sockets: a 1/2“x13 nut (3/4” hex) was epoxied in each socket. The threads were then drilled out to 1/2“. 6) |
||
1)
photo courtesy of kcsporty of the XLFORUM
6)
photos by thunderpaw of the XLFORUM http://xlforum.net/forums/showthread.php?postid=1239036