Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
techtalk:ref:body25 [2022/09/14 21:08]
ixl2relax [Cable Repairs]
techtalk:ref:body25 [2024/01/09 17:26] (current)
hippysmack
Line 15: Line 15:
 ===== Cable Repairs ===== ===== Cable Repairs =====
  
-Here's a link to an [[http://​xlforum.net/​forums/showthread.php?​t=2079976|XLForum Thread]] where Decman (XLF member) provides a link to a Utube video named '​[[https://​youtu.be/​Ysd8JkWclmc|Throttle Cable Solder Repair Tool]]'​. In that thread, Bluto (XLF member) posted a page from Flanders (M/C parts) regarding the repair of or building a cable and terminating the end with a soldered on barrel.+Here's a link to an [[https://www.xlforum.net/​forum/forum-functions/​sportsterpedia-com-admin/​202767-throttle-cable-solder-repair-tool?​t=2079976|XLForum Thread]] where Decman (XLF member) provides a link to a Utube video named '​[[https://​youtu.be/​Ysd8JkWclmc|Throttle Cable Solder Repair Tool]]'​. In that thread, Bluto (XLF member) posted a page from Flanders (M/C parts) regarding the repair of or building a cable and terminating the end with a soldered on barrel.
  
 \\ \\
Line 21: Line 21:
  
 \\ \\
-In another DIY project, XLForum member '​Lehel'​ makes a new Barrel for the broken Clutch Cable and solders it in place: ​http://​xlforum.net/​forums/showthread.php?t=2081910. In this day of throwaway parts, DIY projects are personally satisfying and sometimes keep an historic part in operation, besides being inexpensive. In some places, it's the only option.+In another DIY project, XLForum member '​Lehel'​ makes a new Barrel for the broken Clutch Cable and solders it in place: ​https://www.xlforum.net/​forum/sportster-motorcycle-forum/​sportster-motorcycle-drivetrain/​sportster-motorcycle-transmission-clutch-primary-secondary-drive/​204511-soldering-clutch-cable-non-acid-flux?t=2081910. In this day of throwaway parts, DIY projects are personally satisfying and sometimes keep an historic part in operation, besides being inexpensive. In some places, it's the only option.
  
 Lehel writes: 'You are blessed with parts sources, out there. I am in East Europe.'​((pics by XLForum member '​lehel'​)) His description is like this (slightly edited): Lehel writes: 'You are blessed with parts sources, out there. I am in East Europe.'​((pics by XLForum member '​lehel'​)) His description is like this (slightly edited):
Line 29: Line 29:
 | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-1-lehel.jpg?​400|}} | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-2-lehel.jpg?​400|}} | | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-1-lehel.jpg?​400|}} | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-2-lehel.jpg?​400|}} |
  
-Today I've lost patience searching for fancy stuff (epoxies, etc.). Each wire of the cable end is turned back 180° and pulled back into the barrel. It locked itself in place. I have mounted like this into the lever on the bar. It worked great, not moving at all. Then I soldered. This way, I'm not dependig on the bond of the materials to give me confidence that will last.+Today I've lost patience searching for fancy stuff (epoxies, etc.). Each wire of the cable end is turned back 180° and pulled back into the barrel. It locked itself in place. I have mounted like this into the lever on the bar. It worked great, not moving at all. Then I soldered. This way, I'm not dependig on the bond of the materials to give me confidence that it will last.
  
 | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-3-lehel.jpg?​400|}} | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-4-lehel.jpg?​400|}} | | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-3-lehel.jpg?​400|}} | {{:​techtalk:​ref:​body:​clutchcablebarrel-diy-4-lehel.jpg?​400|}} |