This is an old revision of the document!


REF: Body Parts

Document Tubes / Holders

This one is made from an old D cell Mag-light.
The cut end was sealed with a JB-Weld stick about 3/16“ in from the edge (knurled end).
Then a layer of black silicone was applied on top of that finsihed flush to the edge.
The flashlight was a (3) - battery length light with plenty of tube length to cut off the switch and have enough left over.

Homemade Document Tube 1)

You can put copies of your registration in a plastic bag inside this box that also holds the tag on.
The box will also hold small objects like a spark plug gapper or whatever you want to put in it.
It also has a keyed lock.

Tag and Document Holder 2) Grifter Storage Box 3)


1)
photo by RidingIsMyDrug of the XLFORUM http://xlforum.net/forums/showthread.php?t=1845715
2)
photo by Hippysmack
3)
photo by Taro Tsujimoto of the XLFORUM http://xlforum.net/forums/showthread.php?t=1253428
This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information