Differences
This shows you the differences between two versions of the page.
|
techtalk:ref:elec29 [2021/07/30 02:17] hippysmack created |
techtalk:ref:elec29 [2021/07/30 02:33] (current) hippysmack [VOES Switch] |
||
|---|---|---|---|
| Line 4: | Line 4: | ||
| ====== VOES Switch ====== | ====== VOES Switch ====== | ||
| - | 1986-1993 VOES switch should have a ground wire with a ring terminal that terminates at the top center motor mount bolt to the rear head. \\ | + | 1986-1991 VOES switch should have a ground wire with a ring terminal that terminates at the top center motor mount bolt to the rear head. \\ |
| - | (1986 may have originally grounded to the rear of the center mount bracket but it's safer to use the bolt thru the head) \\ | + | (1986 may have originally grounded to rear of center mount bracket but it's safer to use the bolt thru the head due to paint/rust/poor grounding condition there) \\ |
| + | 1992-1993 VOES ground ran to a pressed/welded stud to the rear of the center mount bracket (dedicated ground point). \\ | ||
| 1994-2003 VOES switch has a ground wire in the same connector block as the signal wire and is grounded by the main electrical system grounds. \\ | 1994-2003 VOES switch has a ground wire in the same connector block as the signal wire and is grounded by the main electrical system grounds. \\ | ||
