Table of Contents

REF: Engine Control - Sub-50B


☚———————————— USERS BE AWARE! ————————————☛

Use these maps at your own risk because there is NO WARRANT OF USABILITY for the MAP Files that are made available on the Sportsterpedia.
These are being hosted for evaluation by individual users and ALL USERS MUST MAKE THEIR OWN EVALUATION of the suitability of using these
MAP Files for their intended engine configuration!

Others have benefited from using some of these maps for their particular engine configuration. However, every engine is different and an incorrect
map can create engine damage. If you have been advised by the supplier of your engine parts to use a particular map, it makes sense to follow
their recommendation, especially during the break-in period. If you later wish to change to some other ignition map, it still makes sense to seek
their advice to learn of any concerns they might have for you to consider.

☚———————————— USERS BE AWARE! ————————————☛


Rico05r/JesterMotorwerkz/Rocketmangb Ignition Maps

This section was created from files supplied by XLForum member, rocketmangb. Many were created by XLForum member, rico05r and left in the care of rocketmangb. To get them into the Sportsterpedia, help was provided by XLForum member, npaisnel, who created the image files and helped with file handling. Thank you very much to all involved.


Instructions for using the ZIPPED files:
1) Click the selected ZIP filename and download (save) it to a convenient directory on your local computer.
2) Then UNZIP the file to obtain the Map Image '-m.jpg', the Table Data '-t.jpg' and the usable '.tbl' data file.
3) Load that '.tbl' data file into the Daytona Twin Tec PC-Link Software to map your ignition module.




1682_VSS_3_25_15_Map_for_1250

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

1682_vss_3_25_15_map_for_1250.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



883mapjakd

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

883mapjakd.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Andrea-s_1250_Map-base

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

andrea-s_1250_map-base.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



basore_Map_for_1250

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

basore_map_for_1250.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



basore_Map_for_1250_2

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

basore_map_for_1250_2.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Blue_Bitch_Table

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

blue_bitch_table.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Greg_Map_2-0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

greg_map_2-0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Hybrid_2-0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

hybrid_2-0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Hybrid_2-0_883_Version

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

hybrid_2-0_883_version.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



jak_2

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jak_2.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



jak_3

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jak_3.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



jak_10-5

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jak_10-5.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Delta

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_delta.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_88-90_Inch_Map_Generic_Mod_1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_88-90_inch_map_generic_mod_1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_88-90_Inch_Map_Generic_VSS_05_1200

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_88-90_inch_map_generic_vss_05_1200.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Moscow_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_moscow_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Rocketman_01-15_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_rocketman_01-15_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Rocketman_03-15_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_rocketman_03-15_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Rocketman_04-15_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_rocketman_04-15_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Rocketman_04-28-2015_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_rocketman_04-28-2015_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Rocketman_05-15_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_rocketman_05-15_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Rocketman_12-14_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_rocketman_12-14_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Jester_Motorwerkz_Scarecrow_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

jester_motorwerkz_scarecrow_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Lenster_Rico_Hybrid_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

lenster_rico_hybrid_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Lenster-s_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

lenster-s_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



MAP_Modified_33

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

map_modified_33.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



MAP_Modified_35_Revised

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

map_modified_35_revised.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Necromancer_883_convert

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

necromancer_883_convert.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



R-D_Map_0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

r-d_map_0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



R-D_Map_1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

r-d_map_1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



R-D_Map_2

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

r-d_map_2.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1212_1-1_1200_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1212_1-1_1200_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1212_1-1_883_gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1212_1-1_883_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1250_Base_Map_1200_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1250_base_map_1200_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1250_Base_Map_883_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1250_base_map_883_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1250_Map_4-1_1200_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1250_map_4-1_1200_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1250_Map_4-1_883_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1250_map_4-1_883_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1250_Map_Smackie_Version

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1250_map_smackie_version.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_1250_Map_Version4-0_883_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_1250_map_version4-0_883_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_221_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_221_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_88inch_Map_1-0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_88inch_map_1-0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_88inch_Map_1-1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_88inch_map_1-1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Hybrid_2-1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_hybrid_2-1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Hybrid_2-2

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_hybrid_2-2.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Hybrid_2-2_883

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_hybrid_2-2_883.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_8_Ball_Capo_Map_06_1200_0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_8_ball_capo_map_06_1200_0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_8_Ball_Capo_Map_06_1200_1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_8_ball_capo_map_06_1200_1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_III_Map_Wedge_Mod

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iii_map_wedge_mod.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_III_Map_Wedge_Mod_1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iii_map_wedge_mod_1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_III_Map_Wedge_Mod_2

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iii_map_wedge_mod_2.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_IV_Map

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iv_map.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_IV_Map_06_1200_0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iv_map_06_1200_0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_IV_Map_06_1200_1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iv_map_06_1200_1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_IV_Map_VSS_1475

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_iv_map_vss_1475.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_Motorwerkz_ Map_for_Andrea_06_883_Gearing

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_motorwerkz_map_for_andrea_06_883_gearing.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_V_Map_04-05_1200

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_v_map_04-05_1200.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_V_Map_04-05_883

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_v_map_04-05_883.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_VII_Map_VSS_04-05_883

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_vii_map_vss_04-05_883.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Jester_VII_Map_VSS_06_883

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_jester_vii_map_vss_06_883.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_King_Jester_Map_0

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_king_jester_map_0.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_King_Jester_Map_1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_king_jester_map_1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Rico-s_Voodoo_Map_06_1200

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rico-s_voodoo_map_06_1200.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



RTM-Andrea_1250_Map_ base-1431_2

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rtm-andrea_1250_map_base-1431_2.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



RTM-Andrea_1250_Map_AGGRESSIVE_Version_4-1

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rtm-andrea_1250_map_aggressive_version_4-1.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



RTM-Andrea_1250_Map_AGGRESSIVE-1431_2_Rev-3

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rtm-andrea_1250_map_aggressive-1431_2_rev-3.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



RTM-Andrea_1250_Map_Revised_aggressive

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rtm-andrea_1250_map_revised_aggressive.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



RTM-Andrea_1250_Map_Revised-aggressive-VSS_1630

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rtm-andrea_1250_map_revised-aggressive-vss_1630.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



RTM-Andrea_1250_Map_Version_4-0_revised_ramp_from_0to45

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

rtm-andrea_1250_map_version_4-0_revised_ramp_from_0to45.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



Scarecrow_1682

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

scarecrow_1682.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



SE_COPY_SORTA

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

se_copy_sorta.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



WEDGE_Mod_1682

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

wedge_mod_1682.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.



WTF_Map_12-29-2014

Click on an image to see a larger scale version.
Click the following filename and download (save) it
to a convenient directory on your local computer.

wtf_map_12-29-2014.zip

Next, UNZIP the file to obtain the Map Image '-m.jpg',
the Table Data '-t.jpg' and the usable '.tbl' data file.

Then LOAD that '.tbl' data file into the Daytona Twin Tec
PC Link Software to map your ignition module.




Use your Browser BACK Button -or-

This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information