Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:ref:genmsr05 [2023/08/01 14:32] hippysmack [Primary] |
techtalk:ref:genmsr05 [2023/08/01 17:28] hippysmack [Primary] |
||
|---|---|---|---|
| Line 684: | Line 684: | ||
| \\ | \\ | ||
| - | * **Symptom: Rattling Noise on Primary Side**. \\ Conv90 submitted video of noise from the primary side: \\ | + | * **Symptom: Rattling Noise**. \\ Conv90 submitted video of noise from the primary side: \\ |
| - | {{ :video:buell_noise_video_by_conv90.mp4 |}} | + | {{:video:buell_noise_video_by_conv90.mp4|}} |
| + | |||
| + | * **Symptom: Rattling Noise**. \\ The tensioner shoe can be loose and rock side to side enough to sound like a lifter problem. It will rock fore and aft into the primary cover. \\ From the cam side of the bike, it'll sound like it's a lifter bouncing around. It's a slow intermittent hollow banging noise. It may only make noise at idle when the chain is least tight. \\ | ||
| + | * **Condition: Loose Primary Chain Adjuster Shoe**. \\ Below is a short video by Conv90 of the XLFORUM showing the hollow noise created. | ||
| + | |||
| + | {{:video:primary_chain_adjuster_shoe_noise_by_conv90.mp4|}} | ||
| + | |||
| + | \\ | ||
| * **Symptom: An extra and constant noise inside of the primary case**. \\ An extra and constant noise inside of the primary case (even / after adjustment of the primary chain adjuster). ((Spor-T-1 of the XLFORUM http://xlforum.net/forums/showthread.php?t=29865)) \\ **Condition: Loose compensator nut / flywheel sprocket shaft nut**. \\ Once the sprocket on that shaft gets loose enough, it will chew the end of your fly wheel. ((dodgenbullets of the XLFORUM http://xlforum.net/forums/showthread.php?t=29865)) If this is the case your motor must come out and the cases split to fix it. \\ | * **Symptom: An extra and constant noise inside of the primary case**. \\ An extra and constant noise inside of the primary case (even / after adjustment of the primary chain adjuster). ((Spor-T-1 of the XLFORUM http://xlforum.net/forums/showthread.php?t=29865)) \\ **Condition: Loose compensator nut / flywheel sprocket shaft nut**. \\ Once the sprocket on that shaft gets loose enough, it will chew the end of your fly wheel. ((dodgenbullets of the XLFORUM http://xlforum.net/forums/showthread.php?t=29865)) If this is the case your motor must come out and the cases split to fix it. \\ | ||
