REF: Oiling & Lubrication - Sub-05F

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Oiling & Lubrication - Sub-05F ======
====== 07 Up Oil Pump Mod For Use in 86-90 Engines ======
Related articles in the Evo section of the Sportsterpedia: \\
........ * [[techtalk:evo:oil01|Engine Oil System]] \\
........ * [[techtalk:evo:oil02|Engine Oil Routes]] \\
\\ 

----

Karling Racing in Sweden designed this mod after flow testing a 2007-up Sportster oil pump for use in an 86-90 engine. ((Jorgen of the XLFORUM http://xlforum.net/forums/showthread.php?t=1619616&page=42)) ((https://www.karlingracing.com/sv)) \\
|  Karling Racing's oil pump mod for 07-up oil pumps. ((photo by Jorgen of the XLFORUM http://xlforum.net/forums/showthread.php?t=1619616&page=42))  |  Another Karling modded oil pump  ((photo by Rubine of the XLFORUM http://xlforum.net/forums/showthread.php?t=1861960&page=10))  |
|{{:techtalk:ref:oil:karling_racing_07_oil_pump_mod_by_jorgen.jpg?direct&300|}}| {{techtalk:ref:oil:karling_modded_07_oil_pump_by_rubine.jpg?direct&300|}}|

====== Applications for this mod ======

__This oil pump modification is only suitable in engines where you want to maximize crankcase sump scavenging__. \\
It was originally designed with a 124" S&S motor in mind. [[http://xlforum.net/forums/showthread.php?t=1619616|The Xlforum build thread is here]]. \\
A Karling modified 2007-and-up oil pump may be an improvement in Sportster Evo engines with pre-98 H-D OEM cases. \\
These engines were not made to scavenge from the cam chest either. They have the oil drain from the cam chest to the sump. \\
So with a Karling-modified oil pump these engines will receive the full scavenge capacity of the 2007-and-up pumps. 

Originally designed for 86-90 engines. \\
Suitable for 91-96 engines. \\
Not recommeneded for 98 and up engines. \\
**It's not a solution or even a consideration for 98-up Sportster engines**. \\
(or rather any that require an oil pump scavenge port in the cam chest) \\

====== Background ======

Previously, most engine builders fitted 4-cam race engines with ProFlow 3-stage or 4-stage oil pumps. \\
Since those pumps are now discontinued, engine builders (Karling and others) often use these OEM pumps for; \\
S&S SA XL and S&S Pro Stock XL-cased race engine builds as well as Delcron and McClure cased 4-cam race engines. \\

In 1998 H-D improved the scavenge capacity of the oil pump and introduced a suction port to the cam chest in the oil pumps. \\
At the same time they also excluded the oil drain hole from the cam chest to the sump. \\
So from then on, the oil pump cam chest suction port is solely responsible for cam chest scavenging. \\
Therefore, the oil pumps cam chest suction port will receive all of the oil entering the cam chest. \\
This was possibly done in order to solve the issues with (too much) oil in the crankcase, or more affectionally known as [[techtalk:ref:oil10|"Wet Sumping"]]. \\
This would reduce the amount of oil entering the crankcase.

In 2004, H-D seemed to have moved further on with the same idea. \\
They re-routed the cylinder head oil returns from the crankcase to the cam chest. \\
However, the rubbermount was also fitted with piston jets. \\
This addition __did not__ add any extra oil to the crankcase but rather kept some oil circulating in the crankcase. \\
(by kidnapping a portion of splash oil that would normally be sent to the gearcase) \\
The splash ports are still operational but the ports were restricted to repurpose some of the oil collected there. \\

In 2007, more improvements were made to the oiling system including bigger feed and return gerotors. \\
(increased the oil flow capacity even further) \\

==== Cam chest drainage ====

Notice the differences in the 86-90 and 91-up cam chest floor. \\
The elevation is stepped down from left to right on both cases. \\

The left side of the cam chest on both style cases will be splashed by the cam gears, pinion and oil pump gears, crankcase windage and etc. \\
Both also have a sunken elevation between the cover mounting bolts on each side of the oil pump. \\
This will allow oil to settle there and drain into the pump's top port (assuming both would have the newer oil pump mounted). \\

However, 86-90 cases also have a cupped dip between the oil pump and the pinion gear lowering the elevation away from the pump. \\
The 91-up cases have a slightly lower elevation between the bolts running flat in that area. \\
This creates slightly more area for oil to gather and allow it to settle there. \\

Normally in 86-97 engines, the oil just gathers there and eventually splashes elsewhere. \\
In 98-up engines, the oil gathered in this area drops down to the oil pump with the extra drain port. \\
And of course, when the oil level rises above the cover mounting bolt under the pinion gear on both cases, oil spills to the right (lower side) of the cam chest floor. \\

86-97 engines would drain that part of the cam floor to the crankcase sump. \\
98-up engines just let it sit there and eventually splash elsewhere also. \\
There are no provisions in the cam covers to transport the oil on the cam floor anywhere else. \\

Click here to see [[techtalk:evo:oil01#oil_passages_from_the_filter_pad|Evo cam chests from different year models]] in the Sportsterpedia.

|  S&S cam chest drain  ((photo by Jorgen of the XLFORUM http://xlforum.net/forums/showthread.php?t=1619616&page=45  ))  |  86-97 cam chest drains to crankcase sump \\ (86-90 engine shown). ((photo by Mini_blitz of the XLFORUM http://xlforum.net/forums/showthread.php?t=1974615&page=3))  |  98-up cam chest drains into the oil pump. \\ (98 engine shown) ((photo by Hippysmack))  |
|{{:techtalk:ref:oil:sands_cam_chest_by_jorgen.jpg?direct&300|}}|{{:techtalk:evo:oil:86-90_engine_scavenging_by_mini_blitz.jpg?direct&300|}}|{{:techtalk:evo:oil:91-99_cam_cover_gasket_1_by_hippysmack.jpg?direct&300|}}|

==== Sportster oil pumps ====

The design of the oil pumps changed with the different oiling system changes to the engines. \\
You can see the runners on the top of the 98-up pumps leading to the cam chest drain port. \\

|  86-90 Oil Pump Oiling Paths. ((photo by Hippysmack))  |  91-97 Oil Pump Oiling Paths  ((photo by Hippysmack))  |  98 and Up Oil Pump Oiling Paths ((photo by bsaman of the XLFORUM http://xlforum.net/forums/showthread.php?t=691283&page=2))  |
|{{:techtalk:evo:oil:86-90_oil_pump_oiling_paths_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:91-97_oil_pump_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:98-up_oil_pump_oiling_paths_by_bsaman.jpg?direct&300|}}|


====== Considerations ======

This mod may improve scavenging of the crankcase sump but it is not the end of wet sumping in the engine. \\

86-91 engines have an [[techtalk:evo:oil01#oil_pressure_regulator_-_1986-1991_models_only|oil pressure regulator]] that dumps excess oil pressure from the filter pad directly into the gearcase. \\
When the regulator malfunctions, additional oil is dumped into the gearcase more often and at varying riding conditions. \\
Read more about [[techtalk:ref:oil05e#oil_pressure_regulator|Oil Pressure Regulator Mods]] in the REF section of the Sportsterpedia. \\

====== Purpose of this mod ======

Several mods have been devised in an attempt to scavenge more oil from 86-90 engines. \\
One of which is the [[techtalk:evo:oil03c|5 Speed Oil Pump on 4 Speed Models (Conversion for 86-90 Evo engines)]] \\
(adapting the engine case to accept a newer style oil pump to an 86-90 engine for better oil control) \\

This mod addresses the issue of the cam chest drain port in the newer style pumps that is not required in 86-96 engines. \\

When using 98-up oil pumps for earlier engines: \\
The concern is since the early engine drains the gearcase into the sump and the 07 pump has an open port in the cam chest; \\
You may be adding more aeration into the return system through the gearcase port in the pump. \\
(which may lead to an increased risk of cavitation) ((Four Speed of the XLFORUM http://xlforum.net/forums/showthread.php?t=1971026&page=25)) \\

**98-up oil pump gearcase drain ports**: \\
In the pic below, the rotation of the gerotors is counter-clockwise. \\
The sump cavity is on the left, middle is the cam chest drain port and on the right is the return  cavity to the oil tank. \\
The pickup from the sump is directly sent to the return cavity while the cam chest port fills after the return cavity empties. \\
Air will compress but oil will not. \\
Likewise, air that is displaced into the cam port will either be sent out or compressed by the oil as the gerotors turn into the sump port. \\
See also the [[techtalk:evo:oil03|Evo Oil Pump Section]] of the Sportsterpedia. \\

|The cam chest drain port is the middle thru hole in \\ this pic (07 pump shown). ((photo by Hippysmack))|As the gerotors reside over the cavities, both pieces \\ rotate together. The relative openings between \\ gears stays the same ((photo by Hippysmack))|
|{{:techtalk:evo:oil:2007_and_up_oil_pump_2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:oil:2007_and_up_oil_pump_5a_by_hippysmack.jpg?direct&300|}}|

====== Testing ======

The reason for testing was due to the 07-up pump having a drain port (on top of the pump body) to drain the gearcase. \\
86-97 engines drain the gearcase into the crankcase sump area to be scavenged by the sump drain to the oil pump. \\
98-up engines drain the gearcase straight into the oil pump. \\
However, the 07 pump is preferred as it has bigger scavenge gerotors that carry more oil out of the engine than it's predecessor. \\ 

The pump was tested before and after the modification in Karlings oil pump test rig. \\

During the flow test they used a reference volume filled from the scavenge outlet. \\
The pump was driven at a controlled shaft speed and partially immersed in a low viscosity fluid to resemble the viscosity of hot engine oil. \\

====== Results ======

When the gearcase port was allowed to suck air with the sump port immersed in liquid, the pump needed 22 seconds to fill the reference volume. ((Jorgen of the XLFORUM http://xlforum.net/forums/showthread.php?t=1619616&page=43)) \\
With the cam chest port blocked off and the internal gerotor kidney machined to optimize sump port scavenge capacity; \\
The pump only needed 13.5 seconds to fill the reference volume. \\
If the cam suction port is fed with air, the total scavenge flow of the 2007-up XL-pump drops to 61%. \\

====== Conclusions from testing ======

The results reportedly revealed that this modification increases the return flow from the sump by 63%. \\
This shows how much return capacity that is left on the table using the 07 pump (if there's no oil in the cam chest to fall into the top port). \\

However, the testing was done in a controlled environment. \\
It is also assuming that the cam chest port in the pump is either full of oil or full of air during normal installed operation. \\
This will never be true in the real world. \\
In an 86-90 engine; \\
Crankcase pressure, cam and pinion gears will end up dropping oil mist and splash oil into the cam chest port of the 98-up oil pumps. \\
It may not be a steady supply of oil but the cam chest port would never be dry. \\
The pressure regulator in the 86-91 engine will dump excess oil into the gearcase as it was designed to do. \\
Some of this will also splash get splash into the cam chest drain port. \\
The regulator is notorious for leaking oil into the gearcase as well (when not activated by designed means). \\

So the results, even though interesting, will vary constantly inside a running 86-90 engine. \\
However, the Karling mod will eliminate the chance of cavitation in the oil pump (that's due from induced air into the cam chest port of the newer style oil pumps) \\


\\


\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]
Trace: • playground • MiscRes: Harley Parts and Accessories Bulletins (PAB) • navigation • EVO: Engine Control • IH: Engine Control • IH: Electrical System • REF: Carburetor, Intake Manifold & Exhaust • EVO: Electrical System • IH: Oiling & Lubrication - Sub-03E • EVO: Engine Control