Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:oil13 [2021/02/22 04:51]
hippysmack [Filter Mounting Locations]
+++ techtalk:ref:oil13 [2021/06/29 03:58]
hippysmack [S&S Oil Filter Mount (1986-1990)]
@@ Line 12: / Line 12: @@
 **Note**: On all spin on oil filters, dirty oil goes in the outside of the filter. Clean oil comes out the center. (( ryder rick of the XLFORUM http://xlforum.net/forums/showthread.php?p=5643382&highlight=oil+filter+bracket#post5643382)) \\
-If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards. \\
+If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards.
+====== In-Tank to External Spin-on Filter Conversion and Plumbing for Ironheads ======
+The 1978 parts catalog lists an external oil filter kit (63795-77) for 77-78 models. Filter mounts on an (included) chrome left lower front motor mount (similar to the 82-E84 mount). \\
+Also in the kit is a chrome oil filter (63796- 77A), hose fitting (63792-77), length of hose, 3 hose clamps (9946) and 3 cable straps. \\
+{{:techtalk:ref:oil:oil_filter_kit_63795-77_pic1_by_jrsvintageharley1990.jpg?direct&300|}} ((photo courtesy of Ebay seller, jrs vintage harley parts. [[https://www.ebay.com/str/jrsvintageharleyparts?_trksid=p2047675.l2563|Link to Ebay Store]] )) {{:techtalk:ref:oil:oil_filter_kit_63795-77_pic2_by_jrsvintageharley1990.jpg?direct&300|}} ((photo courtesy of Ebay seller, jrs vintage harley parts. [[https://www.ebay.com/str/jrsvintageharleyparts?_trksid=p2047675.l2563|Link to Ebay Store]] )) \\
+Simplified drawings showing the different routing of lines for 1957 to 1978 Sportsters while removing the (in-tank) oil filter. \\
+Click on a drawing or pic to enlarge. \\
+{{:techtalk:ref:oil:57-66_xlh_and_58-69_xlch_oil_line_routing_to_oil_filter_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) {{:techtalk:ref:oil:67-76_xlh_and_70-76_xlch_oil_line_routing_to_oil_filter_by_hippysmack_done_w_3d.png?direct&300|}} ((drawing by Hippysmack)) {{:techtalk:ref:oil:77-78_sportster_line_routing_to_oil_filter_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) \\
@@ Line 61: / Line 72: @@
 ====== Filter Mounting Locations ======
 See also [[techtalk:ih:oil01#oil_filter_mount|OEM Ironhead oil filter mount locations]] in the Sportsterpedia. \\
+\\
 ===== On the left motor mount =====
@@ Line 75: / Line 87: @@
 |  Motor mount oil filter on 69 XLCH ((photo by nutter of the XLFORUM http://xlforum.net/forums/showthread.php?t=2005331&highlight=oil+filter+mount))  |  Filter installed on 77 XLCH motor mount. ((photo by konel1 of the XLFORUM http://xlforum.net/forums/showthread.php?t=897611))  |  Filter installed on an 80 XLH motor mount. ((photo by hscic of the XLFORUM http://xlforum.net/forums/showthread.php?t=2053271&highlight=motor+mount+oil+filter&page=45))  |
 |{{:techtalk:ref:oil:motor_mount_filter_adapter_on_69_xlch_1_by_nutter.jpg?direct&300|}}|{{:techtalk:ref:oil:motor_mount_filter_adapter_by_konel1.jpg?direct&300|}}|{{:techtalk:ih:oil:80_xlh_left_side_by_hscic.jpg?direct&300|}}|
+===== Other forward positions =====
+|  This one sets the filter upside down. ((photos by chief of the XLFORUM http://xlforum.net/forums/showthread.php?t=897611))  ||
+|{{:techtalk:ref:oil:motor_mount_filter_adapter_1_by_chief.jpg?direct&300|}}|{{:techtalk:ref:oil:motor_mount_filter_adapter_2_by_chief.jpg?direct&300|}}|
+----
+|A simple bracket with a piece of angle iron bolted to the right frame rail. \\ An automotive spin on filter mount with a 3/4"-16 threaded stem was bolted to it. \\ The PH6022 filter is Fram's cross reference with Harley 63805-80. ((DDDDylan of the XLFORUM http://xlforum.net/forums/showthread.php?p=5280955&highlight=oil+filter+bracket#post5280955))||
+|{{:techtalk:ref:oil:remote_oil_filter_2_by_ddddylan.jpg?direct&300|}}|{{:techtalk:ref:oil:remote_oil_filter_1_by_ddddylan.jpg?direct&300|}}|
+----
+This is an after market filter and cooler setup on a 77 model. ((photo by BLIGHT of the XLFORUM http://xlforum.net/forums/showthread.php?t=578083)) \\
+The filter adapter is 5/"x24. However, you can buy adapters online to increase the adapter size to 13/16" or 3/4". \\
+|{{:techtalk:ref:oil:oil_filter_and_cooler_by_blight.jpg?direct&250|}}|
+----
+This reportedly an old drag specialties item from the early eighty's. ((hasselme0 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1078240&page=3)) ((photos by 78ironhead of the XLFORUM http://xlforum.net/forums/showthread.php?t=1078240&page=3)) \\
+It uses the older felt type filters made for early shovels and is a cooler/filter all in one. \\
+|{{:techtalk:ref:oil:oil_filter_-_cooler_2_by_78ironhead.jpg?direct&300|}}|{{:techtalk:ref:oil:oil_filter_-_cooler_4_by_78ironhead.jpg?direct&300|}}|
+|{{:techtalk:ref:oil:oil_filter_-_cooler_1_by_78ironhead.jpg?direct&300|}}|{{:techtalk:ref:oil:oil_filter_-_cooler_3_by_78ironhead.jpg?direct&300|}}|
+===== Rear mounted filters =====
+|  Custom built oil filter mount. ((photos by dm4x4 of the XLFORUM http://xlforum.net/forums/showthread.php?t=897611))  |||
+|{{:techtalk:ref:oil:custom_oil_filter_mount_1_by_dm4x4.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_2_by_dm4x4.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_3_by_dm4x4.jpg?direct&300|}}|
+----
+|  Custom oil filter on 72 XLH build ((photos by Custom Oil Filter Mount 1 by gixeron1wheel of the XLFORUM
+http://xlforum.net/forums/showthread.php?t=1286445&page=3))  ||  Custom Oil filter on 74 Custom IH ((photo by elteee69 of the XLFORUM http://xlforum.net/forums/showthread.php?t=107243&highlight=fuel+tank&page=11))  |
+|{{:techtalk:ref:oil:custom_oil_filter_mount_1_by_gixeron1wheel.jpg?direct&250|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_2_by_gixeron1wheel.jpg?direct&250|}}|{{:techtalk:ref:oil:remote_oil_filter_on_74_chopper_by_elteee69.jpg?direct&300|}}|
+----
+|  Custom oil filter mount on an 81 XLH ((photos by teledude66 of the XLFORUM http://xlforum.net/forums/showthread.php?t=974924&page=2))  |||
+|{{:techtalk:ref:oil:custom_oil_filter_mount_3_by_teledude66.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_1_by_teledude66.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_2_by_teledude66.jpg?direct&300|}}|
+|As mounted ((photo by teldude66 of the XLFORUM http://xlforum.net/forums/showthread.php?t=974924&page=5))|
+|{{:techtalk:ref:oil:custom_oil_filter_mount_4_by_teledude66.jpg?direct&300|}}|
+----
+|  'Out of Tank' filter mount ((photo by DBH of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002001&page=5))  |
+|{{:techtalk:ref:oil:out_of_tank_oil_filter_4_by_dbh.jpg?direct&300|}}|
+|Filter mounted onto oil tank. The return oil goes through a loop inside of tank, back out through filter and returns through center of filter. ((photos by DBH of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002001&page=5))|||
+|{{:techtalk:ref:oil:out_of_tank_oil_filter_1_by_dbh.jpg?direct&300|}}|{{:techtalk:ref:oil:out_of_tank_oil_filter_2_by_dbh.jpg?direct&300|}}|{{:techtalk:ref:oil:out_of_tank_oil_filter_3_by_dbh.jpg?direct&300|}}|
 ====== Modified and Custom Oil Filter Mounts ======
@@ Line 211: / Line 274: @@
 |{{:techtalk:ref:oil:homemade_oil_filter_mount_16_by_sifty.jpg?direct&300|}}|{{:techtalk:ref:oil:homemade_oil_filter_mount_17_by_sifty.jpg?direct&300|}}|{{:techtalk:ref:oil:homemade_oil_filter_mount_18_by_sifty.jpg?direct&300|}}|
-===== Other forward positions =====
+====== S&S Oil Filter Mount (1986-1990) ======
+This billet oil filter mounting bracket (751510) fits any generator engine with 5/16" generator mounting holes and replaces the OEM 1986-1990 Sportster filter pad. ((https://catalog.zodiac.nl/en/19-oil-tank-filter-line/oil-filter/s-s-oil-filter-mount-5335)) \\
+The oil filter bracket seals off the cam chest and provides a convenient place for a spin-on oil filter. \\
+The bracket is machined for easy routing of an oil cooler in all applications and accepts the stock oil pressure sending switch. \\
+It does not have an oil pressure regulator built into it like the OEM filter pad does. ((A 4 liter V8 eater of the XLFORUM http://xlforum.net/forums/showthread.php?t=1359577&page=88)) \\
-|  This one sets the filter upside down. ((photos by chief of the XLFORUM http://xlforum.net/forums/showthread.php?t=897611))  ||
+|  S&S oil filter mount. ((photos by A 4 liter V8 eater of the XLFORUM http://xlforum.net/forums/showthread.php?t=1359577&page=89))  ||
-|{{:techtalk:ref:oil:motor_mount_filter_adapter_1_by_chief.jpg?direct&300|}}|{{:techtalk:ref:oil:motor_mount_filter_adapter_2_by_chief.jpg?direct&300|}}|
+|{{:techtalk:ref:oil:oil_filter_mount_sands_1986-1990_pic1_by_a_4_liter_v8_eater.jpg?direct&300|}}|{{:techtalk:ref:oil:oil_filter_mount_sands_1986-1990_pic2_by_a_4_liter_v8_eater.jpg?direct&300|}}|
-----
-|A simple bracket with a piece of angle iron bolted to the right frame rail. \\ An automotive spin on filter mount with a 3/4"-16 threaded stem was bolted to it. \\ The PH6022 filter is Fram's cross reference with Harley 63805-80. ((DDDDylan of the XLFORUM http://xlforum.net/forums/showthread.php?p=5280955&highlight=oil+filter+bracket#post5280955))||
-|{{:techtalk:ref:oil:remote_oil_filter_2_by_ddddylan.jpg?direct&300|}}|{{:techtalk:ref:oil:remote_oil_filter_1_by_ddddylan.jpg?direct&300|}}|
-----
-This is an after market filter and cooler setup on a 77 model. ((photo by BLIGHT of the XLFORUM http://xlforum.net/forums/showthread.php?t=578083)) \\
-The filter adapter is 5/"x24. However, you can buy adapters online to increase the adapter size to 13/16" or 3/4". \\
-|{{:techtalk:ref:oil:oil_filter_and_cooler_by_blight.jpg?direct&250|}}|
-----
-This reportedly an old drag specialties item from the early eighty's. ((hasselme0 of the XLFORUM http://xlforum.net/forums/showthread.php?t=1078240&page=3)) ((photos by 78ironhead of the XLFORUM http://xlforum.net/forums/showthread.php?t=1078240&page=3)) \\
-It uses the older felt type filters made for early shovels and is a cooler/filter all in one. \\
-|{{:techtalk:ref:oil:oil_filter_-_cooler_2_by_78ironhead.jpg?direct&300|}}|{{:techtalk:ref:oil:oil_filter_-_cooler_4_by_78ironhead.jpg?direct&300|}}|
-|{{:techtalk:ref:oil:oil_filter_-_cooler_1_by_78ironhead.jpg?direct&300|}}|{{:techtalk:ref:oil:oil_filter_-_cooler_3_by_78ironhead.jpg?direct&300|}}|
-====== Rear mounted filters ======
-|  Custom built oil filter mount. ((photos by dm4x4 of the XLFORUM http://xlforum.net/forums/showthread.php?t=897611))  |||
-|{{:techtalk:ref:oil:custom_oil_filter_mount_1_by_dm4x4.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_2_by_dm4x4.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_3_by_dm4x4.jpg?direct&300|}}|
-----
-|  Custom oil filter on 72 XLH build ((photos by Custom Oil Filter Mount 1 by gixeron1wheel of the XLFORUM
-http://xlforum.net/forums/showthread.php?t=1286445&page=3))  ||  Custom Oil filter on 74 Custom IH ((photo by elteee69 of the XLFORUM http://xlforum.net/forums/showthread.php?t=107243&highlight=fuel+tank&page=11))  |
-|{{:techtalk:ref:oil:custom_oil_filter_mount_1_by_gixeron1wheel.jpg?direct&250|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_2_by_gixeron1wheel.jpg?direct&250|}}|{{:techtalk:ref:oil:remote_oil_filter_on_74_chopper_by_elteee69.jpg?direct&300|}}|
-----
-|  Custom oil filter mount on an 81 XLH ((photos by teledude66 of the XLFORUM http://xlforum.net/forums/showthread.php?t=974924&page=2))  |||
-|{{:techtalk:ref:oil:custom_oil_filter_mount_3_by_teledude66.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_1_by_teledude66.jpg?direct&300|}}|{{:techtalk:ref:oil:custom_oil_filter_mount_2_by_teledude66.jpg?direct&300|}}|
-|As mounted ((photo by teldude66 of the XLFORUM http://xlforum.net/forums/showthread.php?t=974924&page=5))|
-|{{:techtalk:ref:oil:custom_oil_filter_mount_4_by_teledude66.jpg?direct&300|}}|
-----
-|  'Out of Tank' filter mount ((photo by DBH of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002001&page=5))  |
-|{{:techtalk:ref:oil:out_of_tank_oil_filter_4_by_dbh.jpg?direct&300|}}|
-|Filter mounted onto oil tank. The return oil goes through a loop inside of tank, back out through filter and returns through center of filter. ((photos by DBH of the XLFORUM http://xlforum.net/forums/showthread.php?t=1002001&page=5))|||
-|{{:techtalk:ref:oil:out_of_tank_oil_filter_1_by_dbh.jpg?direct&300|}}|{{:techtalk:ref:oil:out_of_tank_oil_filter_2_by_dbh.jpg?direct&300|}}|{{:techtalk:ref:oil:out_of_tank_oil_filter_3_by_dbh.jpg?direct&300|}}|
-----
 \\
 [[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox