Differences

This shows you the differences between two versions of the page.

--- techtalk:ref:oil13 [2021/02/22 04:55]
hippysmack [Rear mounted filters]
+++ techtalk:ref:oil13 [2021/06/29 03:58]
hippysmack [S&S Oil Filter Mount (1986-1990)]
@@ Line 12: / Line 12: @@
 **Note**: On all spin on oil filters, dirty oil goes in the outside of the filter. Clean oil comes out the center. (( ryder rick of the XLFORUM http://xlforum.net/forums/showthread.php?p=5643382&highlight=oil+filter+bracket#post5643382)) \\
-If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards. \\
+If you are not sure, start the motor momentarily with the filter off and if oil is pumped out the center port, you have it backwards.
+====== In-Tank to External Spin-on Filter Conversion and Plumbing for Ironheads ======
+The 1978 parts catalog lists an external oil filter kit (63795-77) for 77-78 models. Filter mounts on an (included) chrome left lower front motor mount (similar to the 82-E84 mount). \\
+Also in the kit is a chrome oil filter (63796- 77A), hose fitting (63792-77), length of hose, 3 hose clamps (9946) and 3 cable straps. \\
+{{:techtalk:ref:oil:oil_filter_kit_63795-77_pic1_by_jrsvintageharley1990.jpg?direct&300|}} ((photo courtesy of Ebay seller, jrs vintage harley parts. [[https://www.ebay.com/str/jrsvintageharleyparts?_trksid=p2047675.l2563|Link to Ebay Store]] )) {{:techtalk:ref:oil:oil_filter_kit_63795-77_pic2_by_jrsvintageharley1990.jpg?direct&300|}} ((photo courtesy of Ebay seller, jrs vintage harley parts. [[https://www.ebay.com/str/jrsvintageharleyparts?_trksid=p2047675.l2563|Link to Ebay Store]] )) \\
+Simplified drawings showing the different routing of lines for 1957 to 1978 Sportsters while removing the (in-tank) oil filter. \\
+Click on a drawing or pic to enlarge. \\
+{{:techtalk:ref:oil:57-66_xlh_and_58-69_xlch_oil_line_routing_to_oil_filter_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) {{:techtalk:ref:oil:67-76_xlh_and_70-76_xlch_oil_line_routing_to_oil_filter_by_hippysmack_done_w_3d.png?direct&300|}} ((drawing by Hippysmack)) {{:techtalk:ref:oil:77-78_sportster_line_routing_to_oil_filter_by_hippysmack.png?direct&300|}} ((drawing by Hippysmack)) \\
@@ Line 262: / Line 273: @@
 |{{:techtalk:ref:oil:homemade_oil_filter_mount_16_by_sifty.jpg?direct&300|}}|{{:techtalk:ref:oil:homemade_oil_filter_mount_17_by_sifty.jpg?direct&300|}}|{{:techtalk:ref:oil:homemade_oil_filter_mount_18_by_sifty.jpg?direct&300|}}|
+====== S&S Oil Filter Mount (1986-1990) ======
+This billet oil filter mounting bracket (751510) fits any generator engine with 5/16" generator mounting holes and replaces the OEM 1986-1990 Sportster filter pad. ((https://catalog.zodiac.nl/en/19-oil-tank-filter-line/oil-filter/s-s-oil-filter-mount-5335)) \\
+The oil filter bracket seals off the cam chest and provides a convenient place for a spin-on oil filter. \\
+The bracket is machined for easy routing of an oil cooler in all applications and accepts the stock oil pressure sending switch. \\
+It does not have an oil pressure regulator built into it like the OEM filter pad does. ((A 4 liter V8 eater of the XLFORUM http://xlforum.net/forums/showthread.php?t=1359577&page=88)) \\
+|  S&S oil filter mount. ((photos by A 4 liter V8 eater of the XLFORUM http://xlforum.net/forums/showthread.php?t=1359577&page=89))  ||
+|{{:techtalk:ref:oil:oil_filter_mount_sands_1986-1990_pic1_by_a_4_liter_v8_eater.jpg?direct&300|}}|{{:techtalk:ref:oil:oil_filter_mount_sands_1986-1990_pic2_by_a_4_liter_v8_eater.jpg?direct&300|}}|
 \\
 [[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox