Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
techtalk:ref:oil22p [2022/07/10 01:28] – [1977-Present Gerotor Oil Pump Capacities] hippysmacktechtalk:ref:oil22p [2024/01/19 15:05] (current) – hippysmack
Line 4: Line 4:
 ====== 1977-Present Gerotor Oil Pump Capacities ====== ====== 1977-Present Gerotor Oil Pump Capacities ======
 ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&800|}}|||||||||||| ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&800|}}||||||||||||
-|  1977-1985 Sportster Oil Pump Volume in (US) Gallons per Minute (GPM)  ||||||||||||+|  1977-Up Sportster Oil Pump Volume in (US) Gallons per Minute (GPM)  ||||||||||||
 |Year Model \\ Oil Pump →|  1977-1985  ||  1986-1990  ||  1991-1997  ||  1998-2006  ||  2007-Present  ||  \\ Oil \\ Pump \\ RPM ↓  | |Year Model \\ Oil Pump →|  1977-1985  ||  1986-1990  ||  1991-1997  ||  1998-2006  ||  2007-Present  ||  \\ Oil \\ Pump \\ RPM ↓  |
 |Engine \\ RPM ↓|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|:::| |Engine \\ RPM ↓|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|Feed \\ Gears|Return \\ Gears|:::|
Line 23: Line 23:
  
 \\ \\
-The chart above is based on testing done by, Hippysmack, of the XLFORUM ((http://xlforum.net/forums/showthread.php?t=2081199)). Overall oil pump volume was calculated by measuring the volume of one tooth cavity in used oil pumps and calculating volume against RPM. The figures take into account that the oil pump turns 1/2 the speed of the engine. [[techtalk:ref:oil22|Click Here]] for the full testing and procedure used in the Sportsterpedia. **NOTE**: The figures in the chart represent 100% pump efficiency and DO NOT take into account any amount of internal pump leakage.+The chart above is based on testing done by, Hippysmack, of the XLFORUM ((https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/203901-sportster-oil-pressure-and-dynamics?t=2081199)). Overall oil pump volume was calculated by measuring the volume of one tooth cavity in used oil pumps and calculating volume against RPM. The figures take into account that the oil pump turns 1/2 the speed of the engine. [[techtalk:ref:oil22|Click Here]] for the full testing and procedure used in the Sportsterpedia. **NOTE**: The figures in the chart represent 100% pump efficiency and DO NOT take into account any amount of internal pump leakage.
 Internal leakage (or slippage) is an inherent condition of these pumps and WILL affect total volume output. Real world GPM will be lower than what is listed above. \\ Internal leakage (or slippage) is an inherent condition of these pumps and WILL affect total volume output. Real world GPM will be lower than what is listed above. \\
  

Trace: