Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
techtalk:ref:tools038 [2021/07/10 02:00] hippysmack [Press Fit Bushing in Bore Charts] |
techtalk:ref:tools038 [2021/07/10 02:05] (current) hippysmack [Press Fit Bushing in Bore Charts] |
||
---|---|---|---|
Line 3: | Line 3: | ||
====== Press Fit Bushing in Bore Charts ====== | ====== Press Fit Bushing in Bore Charts ====== | ||
+ | The chart below was created with reference to a chart from All Industry Supplies ((https://www.aismn.com/products/drill-bushings/hole-preperation/)) \\ | ||
- | |PRESS-FIT \\ BUSHING OD||RECOMMENDED \\ HOLE SIZE|PRESS-FIT \\ BUSHING OD||RECOMMENDED \\ HOLE SIZE| | + | | **SAE** ||| **Metric** ||| |
+ | |**PRESS-FIT \\ BUSHING OD**||**RECOMMENDED \\ HOLE SIZE**|**PRESS-FIT \\ BUSHING OD**||**RECOMMENDED \\ HOLE SIZE**| | ||
|NOMINAL|ACTUAL|:::|NOMINAL|ACTUAL|:::| | |NOMINAL|ACTUAL|:::|NOMINAL|ACTUAL|:::| | ||
|5/32"|.1578"-.1575"|.1565"-.1570"|3mm|3.020mm-3.014mm|3.000mm-3.010mm| | |5/32"|.1578"-.1575"|.1565"-.1570"|3mm|3.020mm-3.014mm|3.000mm-3.010mm| |