REF: Tools - 108 - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Tools - 108 ======
====== Inspection Camera ======
There are many uses for a small inspection camera including checking condition of pistons, cylinder walls, chamber debris and valves through the spark plug hole. Below are some other useful ways to use the camera. \\ Click on a pic to enlarge:

|  Check your belt tension without lying on the floor to see the scale on the belt guard  |||
|{{techtalk:ref:tools:inspection_camera_on_magnetic_base_2_by_gospelman.jpg?direct&300|}}|{{techtalk:ref:tools:inspection_camera_on_magnetic_base_3_by_gospelman.jpg?direct&300|}}|{{techtalk:ref:tools:inspection_camera_on_magnetic_base_4_by_gospelman.jpg?direct&300|}}|
|Camera mounted to a dial indicator magnetic base ((Pic by Gospelman of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/191065-rear-drive-belt-tension-scale?t=2039451))|Note position of the belt in the window with no force \\ applied ((Pic by Gospelman of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/191065-rear-drive-belt-tension-scale?t=2039451))|Finally, the belt with 10 ft/lb applied using the belt \\ tensioning tool  ((Pic by Gospelman of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/191065-rear-drive-belt-tension-scale?t=2039451))|

|  This 45° mirror attachment allows you to see horizontal holes and features \\ that are normally blocked from view as in below. ((photos by Hippysmack))  ||
|{{:techtalk:ref:tools:inspection_camera_45_deg_mirror_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:inspection_camera_45_deg_mirror_2_by_hippysmack.jpg?direct&300|}}|

|  Checking for debris in the oiling holes in the lifter bores. ((photos by Hippysmack))  |||
|{{:techtalk:ref:tools:91-99_lifter_pin_screw_upgrade_17_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:91-99_lifter_pin_screw_upgrade_19_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:91-99_lifter_pin_screw_upgrade_21_by_hippysmack.jpg?direct&300|}}|



\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • REF: Service Procedures 9 • REF: Service Procedures 11E • EVO: Engine Mechanicals • REF: Engine Mechanicals - Sub-01R • REF: Tools - 108 • W E L C O M E !

Navigation

Search

Toolbox