REF: Tools - 115 - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Tools - 115 ======
====== Clutch Hub / Spring Compressor Tools ======
===== 4 Speed =====

|{{techtalk:ref:tools:4_speed_clutch_tools_1_by_72_ironhead_xlh.jpg?direct&300|}}|{{techtalk:ref:tools:4_speed_clutch_tools_2_by_72_ironhead_xlh.jpg?direct&300|}}|
|  **4 Speed Clutch Hub Tools** ((72 Ironhead XLH http://xlforum.net/forums/showthread.php?t=1981137&highlight=sprocket+lock&page=2))  ||

|{{techtalk:ref:tools:clutch_tool_1_by_arkyboy.jpg?direct&300|}}|{{techtalk:ref:tools:clutch_tool_2_by_arkyboy.jpg?direct&300|}}|
|  **Clutch Hub Tool** ((photos by arkyboy of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=6))  ||

|Two pieces of timber screwed together, some 1/4" \\ UNC threaded rod, 1/4" nuts and washers. It does not \\ have the center screw like the factory tool. Just tighten \\ down the nuts on the threaded rod to compress the \\ clutch springs. ((Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586))| This one uses an auto harmonic balancer puller as \\ a center torque shaft|
|{{techtalk:ref:tools:clutch_compressor_tool_by_hopper.jpg?direct&300|}}|{{techtalk:ref:tools:clutch_spring_compressing_tool_by_ironmick.jpg?direct&300|}}|{{:techtalk:ref:tools:clutch_spring_compressor_by_tribulation.jpg?direct&200|}}|
|  **Clutch spring compressor** ((photo by Hopper of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586))  |  **Clutch spring compressor** ((photo by IronMick of the XLFORUM http://xlforum.net/forums/showthread.php?threadid=2023217))  |  **Clutch spring compressor** ((photo by Tribulation of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=18))  |

===== 5 Speed (1991-later) =====

There are a number of ways to accomplish the compression of the Clutch Diaphragm Spring.

{{:techtalk:ref:priclutch:91-later-clutchdiaphragm-compressiontool-1.jpg?600|}}\\

{{:techtalk:ref:tools:clutch_spring_compressor_1_by_dirty_don.jpg?direct&300|}}{{:techtalk:ref:tools:clutch_spring_compressor_2_by_dirty_don.jpg?direct&300|}}{{:techtalk:ref:tools:clutch_spring_compressor_3_by_dirty_don.jpg?direct&300|}} ((photos by Dirty Don of the XLFORUM http://xlforum.net/forums/showthread.php?threadid=1608837))

{{:techtalk:ref:tools:clutch_compression_tool_1_by_jt1200r.jpg?direct&300|}} {{:techtalk:ref:tools:clutch_compression_tool_2_by_jt1200r.jpg?direct&300|}} ((photos by Jt1200r of the XLFORUM http://xlforum.net/forums/showthread.php?t=49915&page=14))

3" PVC cap w/ 5/16"x24 bolt or all-thread, coupler, nut and washer. \\
{{:techtalk:ref:tools:clutch_spring_compressor_by_trainman.jpg?direct&300|}} ((photo by trainman of the XLFORUM)) {{:techtalk:ref:tools:clutch_spring_compressor_by_daytonasportster.jpg?direct&300|}} ((photo by DaytonaSportster of the XLFORUM http://xlforum.net/forums/showthread.php?t=1742779)) 

{{:techtalk:ref:priclutch:91-later-clutchdiaphragm-compressiontool-2.jpg?600|}}\\

{{:techtalk:ref:priclutch:91-later-clutchdiaphragm-compressiontool-3.jpg?600|}}\\

And here are a couple commercial products:\\
{{:techtalk:ref:priclutch:91-later-clutchdiaphragm-compressiontool-5.jpg?600|}}



\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]
Trace: • REF: Engine Mechanicals - Sub-01I • REF: Engine Mechanicals - Sub-01M • EVO: Engine Control - Sub-03b • REF: Tools - 162
Navigation

Search

Toolbox
