[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Tools - 162 ======
====== Pushrod Tubes ======
====== 91-Up ======
A standard Allen wrench can be used to remove or install the tube base bolts. \\
But it won't help to properly torque the bolts on installation. \\ 
A short Allen wrench adapter, short extension and a 3/8" socket wrench works well for removing / installing the bolts. \\
|The short Allen adapter and extension brings the wrench to the smaller OD area of the tube. \\ A beam type torque wrench with a small head will then work for proper torque on the bolts. ((photos by Hippysmack))|| 
|{{:techtalk:ref:tools:pushrod_tubes_2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:pushrod_tubes_16_by_hippysmack.jpg?direct&300|}}|


\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]