Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
techtalk:ref:tools808 [2021/02/06 17:57] hippysmack [Hex Bolt and Socket (Allen) Screw Wrench Sizes] |
techtalk:ref:tools808 [2021/02/06 18:55] hippysmack [REF: Hex, Socket (Allen) and Torx Bolt and Screw Wrench Sizes] |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| ====== REF: Hex, Socket (Allen) and Torx Bolt and Screw Wrench Sizes ====== | ====== REF: Hex, Socket (Allen) and Torx Bolt and Screw Wrench Sizes ====== | ||
| \\ | \\ | ||
| + | With the charts below and knowing or deducing the nut / bolt thread size, you can figure what size wrench is needed. If you are not sure of the thread size, you can reference the [[http://sportsterpedia.com/doku.php/techtalk:ref:tools020|Hardware P/N & Descriptions]] pages in the Sportsterpedia to find bolt sizes for IH and Evo Sportsters. And likewise, if you know the wrench size, you can sometimes deduce the thread size (barring course or fine threading). \\ | ||
| + | |||
| + | |||
| ====== Hex Bolt and Socket (Allen) Screw Wrench Sizes ====== | ====== Hex Bolt and Socket (Allen) Screw Wrench Sizes ====== | ||
| Line 31: | Line 34: | ||
| ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}|||||||||| | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}|||||||||| | ||
| - | |Screw\\ Size|Torx Socket \\ Set Screw|Torx Socket \\ Cap Screw|Torx Pan \\ Head Screw|Torx Flat \\ Head Screw| Torx Fillister \\ Head Screw|Torx Truss \\ Head Screw|Torx Oval \\ Head Screw|Torx Hex \\ Head Screw|Torx Internal \\ Washer Head \\ Screw| | + | |**Screw\\ Size**|Torx Socket \\ Set Screw|Torx Socket \\ Cap Screw|Torx Pan \\ Head Screw|Torx Flat \\ Head Screw| Torx Fillister \\ Head Screw|Torx Truss \\ Head Screw|Torx Oval \\ Head Screw|Torx Hex \\ Head Screw|Torx Internal \\ Washer Head \\ Screw| |
| | #2 | T3 | - | T7 | T6 | - | - | - | - | T7 | | | #2 | T3 | - | T7 | T6 | - | - | - | - | T7 | | ||
| | #3 | T5 | - | T8 | T7 | - | - | - | - | T8 | | | #3 | T5 | - | T8 | T7 | - | - | - | - | T8 | | ||
| Line 47: | Line 50: | ||
| ====== SAE to Metric Hex Wrench Conversions ====== | ====== SAE to Metric Hex Wrench Conversions ====== | ||
| + | When you reference the hex wrench chart below, be aware that using a larger size wrench will increase the chances of stripping the bolt head corners. In some cases, you may want to try using a size above the one recommended in the chart to see if it fits by chance. Not every metric size has a perfect SAE counterpart and vice-versa. There is no perfect substitute for the right size tool. \\ | ||
| ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}||||||||||| | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}||||||||||| | ||
| - | |SAE Hex \\ Wrench Size|5/16"|3/8"|7/16"|1/2"|9/16"|5/8"|3/4"|13/16"|7/8"|15/16"| | + | |**SAE Hex \\ Wrench Size**|5/16"|3/8"|7/16"|1/2"|9/16"|5/8"|3/4"|13/16"|7/8"|15/16"| |
| |SAE \\ Bolt Size|1/8"|3/16"|1/4"|5/16"|3/8"|7/16"|1/2"|9/16"|9/16"|5/8"| | |SAE \\ Bolt Size|1/8"|3/16"|1/4"|5/16"|3/8"|7/16"|1/2"|9/16"|9/16"|5/8"| | ||
| - | |Metric Hex \\ Wrench Size|8mm|10mm|11mm|13mm|14mm|16mm|19mm|21mm|22mm|24mm| | + | |**Metric Hex \\ Wrench Size**|8mm|10mm|11mm|13mm|14mm|16mm|19mm|21mm|22mm|24mm| |
| ====== SAE to Metric Hex Key (Allen Head) Conversions ====== | ====== SAE to Metric Hex Key (Allen Head) Conversions ====== | ||
| - | When you reference the hex key chart above, be aware that using a smaller size bit will increase the chances of stripping a bolt. ((https://handtoolessentials.com/blog/tools/sae-to-metric-conversions-hex-keys/#:~:text=SAE%20to%20Metric%20Conversions%20for%20Hex%20Keys%20Chart,%203.5%20mm%20%206%20more%20rows%20)) In some cases, you may want to try using a size above the one recommended in the chart to see if it fits by chance. Not every metric size has a perfect SAE counterpart and vice-versa. There is no perfect substitute for the right tool. \\ | + | When you reference the hex key chart below, be aware that using a smaller size bit will increase the chances of stripping the corners. ((https://handtoolessentials.com/blog/tools/sae-to-metric-conversions-hex-keys/#:~:text=SAE%20to%20Metric%20Conversions%20for%20Hex%20Keys%20Chart,%203.5%20mm%20%206%20more%20rows%20)) In some cases, you may want to try using a size above the one recommended in the chart to see if it fits by chance. Not every metric size has a perfect SAE counterpart and vice-versa. There is no perfect substitute for the right size tool. \\ |
| ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}||||||||||| | ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}||||||||||| | ||
| - | |SAE Hex Key|5/64"|3/32"|7/64"|1/8"|5/32"|3/16"|7/32"|1/4"|5/16"|3/8"| | + | |**SAE Hex Key**|5/64"|3/32"|7/64"|1/8"|5/32"|3/16"|7/32"|1/4"|5/16"|3/8"| |
| - | |Metric Hex Key|2mm|2-1/2mm|3mm|3-1/2mm|4mm|5mm|6mm|7mm|8mm|10mm| | + | |**Metric Hex Key**|2mm|2-1/2mm|3mm|3-1/2mm|4mm|5mm|6mm|7mm|8mm|10mm| |
| \\ | \\ | ||
