Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
techtalk:ref:wheels03 [2020/06/22 19:48] hippysmack [Mixing Brake Fluids] |
techtalk:ref:wheels03 [2020/06/22 19:57] hippysmack [Mixing Brake Fluids] |
||
---|---|---|---|
Line 46: | Line 46: | ||
* If silicone is introduced into an older brake system; \\ The silicone will latch onto the sludge generated by gradual component deterioration and create a gelatin like goop. \\ (which will attract more crud and eventually plug up metering orifices or cause pistons to stick) \\ If you have already changed to DOT 5, don't compound the problem and change back. \\ You will never get all of the silicone out of your system. Just change the fluid regularly. \\ For those who race using silicone fluid; \\ Crack the bleed screws before each racing session to insure that there is no water in the calipers. ((http://importnut.net/brakefluid.htm)) | * If silicone is introduced into an older brake system; \\ The silicone will latch onto the sludge generated by gradual component deterioration and create a gelatin like goop. \\ (which will attract more crud and eventually plug up metering orifices or cause pistons to stick) \\ If you have already changed to DOT 5, don't compound the problem and change back. \\ You will never get all of the silicone out of your system. Just change the fluid regularly. \\ For those who race using silicone fluid; \\ Crack the bleed screws before each racing session to insure that there is no water in the calipers. ((http://importnut.net/brakefluid.htm)) | ||
- | | Note the gooey mess from mixing Dot 5 and Dot 3 fluids. ((photos by FearlessFrisbee of the XLFORUM http://xlforum.net/forums/showthread.php?t=1508535)) || | + | | Note the gooey mess from mixing Dot 5 and Dot 3 fluids. ((photos by FearlessFrisbee of the XLFORUM http://xlforum.net/forums/showthread.php?t=1508535)) ((photo by brianbbs67 of the XLFORUM http://xlforum.net/forums/showthread.php?s=b7cdc14394b5d341991efe72f18f9aad&t=1932868&page=2)) ||| |
- | |{{:techtalk:ref:wheels:dot_5_-_dot_3_mix_goop_1_by_fearlessfrisbee.jpg?direct&300|}}|{{:techtalk:ref:wheels:dot_5_-_dot_3_mix_goop_2_by_fearlessfrisbee.jpg?direct&300|}}| | + | |{{:techtalk:ref:wheels:dot_5_-_dot_3_mix_goop_1_by_fearlessfrisbee.jpg?direct&300|}}|{{:techtalk:ref:wheels:dot_5_-_dot_3_mix_goop_2_by_fearlessfrisbee.jpg?direct&300|}}|{{:techtalk:ref:wheels:1977_front_master_cylinder_piston_gummed_up_by_brianbbs67.jpg?direct&300|}}| |
- | ===== Replacing Brake Fluid (Dot 3 to Dot 5) ===== | + | ===== Swapping Brake Fluid (Dot 3 to Dot 5) ===== |
The following is found in HD Technical Service Bulletin M-712 dated June 16,1977. \\ | The following is found in HD Technical Service Bulletin M-712 dated June 16,1977. \\ |