1“ Drag Bars w/ stock risers and cables on a 2014 XL1200C - 30” wide, 6“ pullback, 8” center. 1) |
Done on a 2005 1200R Using 3/4” sockets: a 1/2“x13 nut (3/4” hex) was epoxied in each socket. The threads were then drilled out to 1/2“. 6) |
||
Start with some square stock aluminum, drill holes for the bars (7/8” / 1“ etc.) and mark center on the outside edge to cut a pinch slot. 8) | ||
The pinch slot can be cut with a hacksaw. Drill the hole for the pinch bolt, countersink that for a cap head bolt. Drill and countersink the second hole for the mounting bolt to the upper tree. 9) |
||