|———————————— Videos by IronMick ————————————|

Here's my 1978 followed by my 1980. IMO this is the sound of a well tuned, good running IronHead. You can hear each of the parts of the IronHead symphony at various times in the video. Listen for the exhaust sound and the valve train. Listen especially when the camera is close to the engine, both sides… ¹⁾

The 1980 IronHead became extra noisy about 40,000 KMs after top and bottom rebuild. Replaced cams; bushings and bearings good. Chains, push rods adjusted. Oils, tuneup good. No leaks. Conclusion: this is the sound of a well adjusted, well tuned IronHead. A symphony of cams, solid lifters, push rods, rockers, valves and valve springs.

1978 Ironhead transmission on the bench.