Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:carb03 [2019/04/09 04:45]
hippysmack [Intake Manifold]
+++ techtalk:evo:carb03 [2022/10/03 04:30]
hippysmack [Subdocuments]
@@ Line 2: / Line 2: @@
 ====== EVO: Carburetor, Intake Manifold & Exhaust ======
 ====== Intake Manifold ======
+==== Subdocuments ====
-|  Factory Equipped with Keihin Non-CV Carburetor  ||||||
+  * [[techtalk:evo:carb03a|Installing Intake Manifold (27004-88A)]] \\
-|Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb \\ Insulating Spacer|
-|:::|:::|Front|Rear|:::|:::|
-|**86-87**|27004-86 \\ sold individually|27009-86|27010-86|26995-86A|27003-86|
-|:::|:::|flange upgrade (Late 1986)||:::|insulator upgrade (1988)|
-|:::|:::|27009-86A|27010-86A|:::|27003-86A|
-|:::|:::|flange upgrade (1989)||:::|:::|
-|:::|:::|27009-86B|27010-86B|:::|:::|
-|  Factory Equipped with Keihin CV Carburetor  ||||||
+^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}|||||||
-|Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb Seal|
+|  HD Sportster Manifold and Parts  |||||||
-|:::|:::|Front|Rear|:::|:::|
+|Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb \\ Insulating Spacer|OEM Carb \\ Keihin "Butterfly" \\ non-CV |
-|**88-89**|27004-88 \\ rubber intake \\ sold individually|27009-86A|27010-86A|26995-86A \\ w/ insert (2) \\ 29049-88|worm clamp|
+|:::|:::|Front|Rear|:::|:::|:::|
-|:::|:::|flange upgrade (1989)||:::|:::|
+|**1986-1987**|27004-86 \\ sold individually|27009-86|27010-86|26995-86A|27003-86|:::|
-|:::|:::|27009-86B|27010-86B|:::|:::|
+|:::|:::|flange upgrade (Late 1986)||:::|insulator upgrade (1988)|:::|
-|**90-03**|27004-88A \\ aluminum intake (27004-89) \\ sold as kit with \\ intake and carb seals|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|
+|:::|:::|27009-86A|27010-86A|:::|27003-86A|:::|
-|**04-06**|27024-04 \\ aluminum intake \\ sold as kit with \\ (map,seal,clip & screw)|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|
+|:::|:::|flange upgrade (1989)||:::|:::|:::|
-====== 90-03 Intake Manifold (27004-88A) ======
+|:::|:::|27009-86B|27010-86B|:::|:::|:::|
-Sold as a kit with intake and carb seals. \\
+|Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb Seal|OEM Carb \\ Keihin "CV"|
+|:::|:::|Front|Rear|:::|:::|:::|
+|**1988-1989**|27004-88 \\ rubber intake \\ sold individually|27009-86A|27010-86A|26995-86A \\ w/ insert (2) \\ 29049-88|worm clamp|:::|
+|:::|:::|flange upgrade (1989)||:::|:::|:::|
+|:::|:::|27009-86B|27010-86B|:::|:::|:::|
+|**1990-2003**|27004-88A \\ aluminum intake (27004-89) \\ sold as kit with \\ intake and carb seals|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|:::|
+|**2004-2006**|27024-04 \\ aluminum intake \\ sold as kit with \\ (map,seal,clip & screw)|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|:::|
+\\
+|  1986-1987 Sportster Intake Manifold (27004-86) ((photos courtesy of Stripped Down Cycles [[https://www.ebay.com/str/strippeddowncycles?_trksid=p2047675.m3561.l2563|Link to Ebay Store:]] ))  |||
+|{{:techtalk:evo:carb:1986-1987_sportster_intake_manifold_pic1_by_stripped_down_cycles.jpg?direct&300|}}|{{:techtalk:evo:carb:1986-1987_sportster_intake_manifold_pic2_by_stripped_down_cycles.jpg?direct&300|}}|{{:techtalk:evo:carb:1986-1987_sportster_intake_manifold_pic3_by_stripped_down_cycles.jpg?direct&300|}}|
+|  1990-2003 Sportster Intake Manifold (27004-88A) sold as a kit w/ intake and carb seals. ((photos by Hippysmack))  ||
 |Intake casting part number: (27004-89)|Shown with flanges. \\ Front: (27009-86A) Rear: (27010-86A)|
 |{{:techtalk:evo:carb:intake_manifold_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:carb:intake_manifold_2_by_hippysmack.jpg?direct&300|}}|
+===== 04-06 Intake Manifold =====
+===== 07 and Up Intake Manifold =====
+-up (EFI) heads have a wider bolt pattern for the intake flanges. ((aswtacing of the XLFORUM http://xlforum.net/forums/showthread.php?p=5716946&highlight=intake+manifold#post5716946)) \\
+It's easier to get to the bolts on 07 and up intakes. \\
+All the 2007+ heads have their manifold mating surfaces milled down about 1/16" as compared with carb type heads. \\
+If you were to try and put the carb type intake manifold on an 07 engine, you'll find it needs to be about 1/8" wider. \\
+If you don't get a wider manifold, there's a good chance you'll have issues with the seals being sucked into the intake ports on decel.
+{{:techtalk:evo:carb:intake_flanges_by_4-pac.jpg?direct&300|}} ((photo by 4-pac of the XLFORUM http://xlforum.net/forums/showthread.php?t=254258)) \\
 ====== Intake Flanges ======
@@ Line 31: / Line 47: @@
 ====== Seals ======
-==== 90-03 Intake Seals ====
+===== 90-03 Intake Seals =====
 |{{:techtalk:evo:carb:intake_manifold_3_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:carb:intake_manifold_6_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:carb:intake_manifold_7_by_hippysmack.jpg?direct&300|}}|
-[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]
 \\
+[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace:

Differences

Navigation

Search

Toolbox