Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
techtalk:evo:carb03 [2022/10/03 00:32] – [Intake Manifold] hippysmacktechtalk:evo:carb03 [2024/01/02 22:09] (current) – hippysmack
Line 2: Line 2:
 ====== EVO: Carburetor, Intake Manifold & Exhaust ====== ====== EVO: Carburetor, Intake Manifold & Exhaust ======
 ====== Intake Manifold ====== ====== Intake Manifold ======
 +==== Subdocuments ====
 +
 +  * [[techtalk:evo:carb03a|Installing Intake Manifold (27004-88A)]] \\
 +
 ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}||||||| ^{{techtalk:miscres:instruction_sheet_header_4.png?nolink&830|}}|||||||
 |  HD Sportster Manifold and Parts  ||||||| |  HD Sportster Manifold and Parts  |||||||
 |Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb \\ Insulating Spacer|OEM Carb \\ Keihin "Butterfly" \\ non-CV | |Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb \\ Insulating Spacer|OEM Carb \\ Keihin "Butterfly" \\ non-CV |
 |:::|:::|Front|Rear|:::|:::|:::| |:::|:::|Front|Rear|:::|:::|:::|
-|**86-87**|27004-86 \\ sold individually|27009-86|27010-86|26995-86A|27003-86|:::|+|**1986-1987**|27004-86 \\ sold individually|27009-86|27010-86|26995-86A|27003-86|:::|
 |:::|:::|flange upgrade (Late 1986)||:::|insulator upgrade (1988)|:::| |:::|:::|flange upgrade (Late 1986)||:::|insulator upgrade (1988)|:::|
 |:::|:::|27009-86A|27010-86A|:::|27003-86A|:::| |:::|:::|27009-86A|27010-86A|:::|27003-86A|:::|
Line 13: Line 17:
 |Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb Seal|OEM Carb \\ Keihin "CV"| |Year Model|Intake \\ Manifold|  Flanges  ||Intake Seal (2)|Carb Seal|OEM Carb \\ Keihin "CV"|
 |:::|:::|Front|Rear|:::|:::|:::| |:::|:::|Front|Rear|:::|:::|:::|
-|**88-89**|27004-88 \\ rubber intake \\ sold individually|27009-86A|27010-86A|26995-86A \\ w/ insert (2) \\ 29049-88|worm clamp|:::|+|**1988-1989**|27004-88 \\ rubber intake \\ sold individually|27009-86A|27010-86A|26995-86A \\ w/ insert (2) \\ 29049-88|worm clamp|:::|
 |:::|:::|flange upgrade (1989)||:::|:::|:::| |:::|:::|flange upgrade (1989)||:::|:::|:::|
 |:::|:::|27009-86B|27010-86B|:::|:::|:::| |:::|:::|27009-86B|27010-86B|:::|:::|:::|
-|**90-03**|27004-88A \\ aluminum intake (27004-89) \\ sold as kit with \\ intake and carb seals|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|:::| +|**1990-2003**|27004-88A \\ aluminum intake (27004-89) \\ sold as kit with \\ intake and carb seals|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|:::| 
-|**04-06**|27024-04 \\ aluminum intake \\ sold as kit with \\ (map,seal,clip & screw)|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|:::| +|**2004-2006**|27024-04 \\ aluminum intake \\ sold as kit with \\ (map,seal,clip & screw)|27009-86A|27010-86A|26995-86A|ring seal \\ 27002-89|:::| 
-===== 90-03 Intake Manifold (27004-88A) ===== +\\
-==== Subdocuments ====+
  
-  * [[techtalk:evo:carb03a|Installing Intake Manifold (27004-88A)]] \\ +|  1986-1987 Sportster Intake Manifold (27004-86) ((photos courtesy of Stripped Down Cycles [[https://www.ebay.com/str/strippeddowncycles?_trksid=p2047675.m3561.l2563|Link to Ebay Store:]] ))  ||| 
- +|{{:techtalk:evo:carb:1986-1987_sportster_intake_manifold_pic1_by_stripped_down_cycles.jpg?direct&300|}}|{{:techtalk:evo:carb:1986-1987_sportster_intake_manifold_pic2_by_stripped_down_cycles.jpg?direct&300|}}|{{:techtalk:evo:carb:1986-1987_sportster_intake_manifold_pic3_by_stripped_down_cycles.jpg?direct&300|}}|
-----+
  
-Sold as a kit with intake and carb seals. \\+|  1990-2003 Sportster Intake Manifold (27004-88A) sold as a kit w/ intake and carb seals. ((photos by Hippysmack))  ||
 |Intake casting part number: (27004-89)|Shown with flanges. \\ Front: (27009-86A) Rear: (27010-86A)| |Intake casting part number: (27004-89)|Shown with flanges. \\ Front: (27009-86A) Rear: (27010-86A)|
 |{{:techtalk:evo:carb:intake_manifold_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:carb:intake_manifold_2_by_hippysmack.jpg?direct&300|}}| |{{:techtalk:evo:carb:intake_manifold_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:evo:carb:intake_manifold_2_by_hippysmack.jpg?direct&300|}}|
Line 32: Line 34:
  
 ===== 07 and Up Intake Manifold ===== ===== 07 and Up Intake Manifold =====
-2007-up (EFI) heads have a wider bolt pattern for the intake flanges. ((aswtacing of the XLFORUM http://xlforum.net/forums/showthread.php?p=5716946&highlight=intake+manifold#post5716946)) \\+2007-up (EFI) heads have a wider bolt pattern for the intake flanges. ((aswtacing of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-motor-top-end/195512-xr-heads-on-xl?highlight=intake+manifold#post4255444)) \\
 It's easier to get to the bolts on 07 and up intakes. \\ It's easier to get to the bolts on 07 and up intakes. \\
 All the 2007+ heads have their manifold mating surfaces milled down about 1/16" as compared with carb type heads. \\ All the 2007+ heads have their manifold mating surfaces milled down about 1/16" as compared with carb type heads. \\
Line 38: Line 40:
 If you don't get a wider manifold, there's a good chance you'll have issues with the seals being sucked into the intake ports on decel. If you don't get a wider manifold, there's a good chance you'll have issues with the seals being sucked into the intake ports on decel.
  
-{{:techtalk:evo:carb:intake_flanges_by_4-pac.jpg?direct&300|}} ((photo by 4-pac of the XLFORUM http://xlforum.net/forums/showthread.php?t=254258)) \\+{{:techtalk:evo:carb:intake_flanges_by_4-pac.jpg?direct&300|}} ((photo by 4-pac of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/53895-06-carb-to-07-fuel-injection-conversion?t=254258)) \\ 
 ====== Intake Flanges ====== ====== Intake Flanges ======
  

Trace: • EVO: Carburetor, Intake Manifold & Exhaust