Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
techtalk:evo:carb03 [2022/10/03 04:30] hippysmack [Subdocuments] |
techtalk:evo:carb03 [2024/01/02 22:09] (current) hippysmack |
||
---|---|---|---|
Line 34: | Line 34: | ||
===== 07 and Up Intake Manifold ===== | ===== 07 and Up Intake Manifold ===== | ||
- | 2007-up (EFI) heads have a wider bolt pattern for the intake flanges. ((aswtacing of the XLFORUM http://xlforum.net/forums/showthread.php?p=5716946&highlight=intake+manifold#post5716946)) \\ | + | 2007-up (EFI) heads have a wider bolt pattern for the intake flanges. ((aswtacing of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-motor-engine/sportster-motorcycle-motor-top-end/195512-xr-heads-on-xl?highlight=intake+manifold#post4255444)) \\ |
It's easier to get to the bolts on 07 and up intakes. \\ | It's easier to get to the bolts on 07 and up intakes. \\ | ||
All the 2007+ heads have their manifold mating surfaces milled down about 1/16" as compared with carb type heads. \\ | All the 2007+ heads have their manifold mating surfaces milled down about 1/16" as compared with carb type heads. \\ | ||
Line 40: | Line 40: | ||
If you don't get a wider manifold, there's a good chance you'll have issues with the seals being sucked into the intake ports on decel. | If you don't get a wider manifold, there's a good chance you'll have issues with the seals being sucked into the intake ports on decel. | ||
- | {{:techtalk:evo:carb:intake_flanges_by_4-pac.jpg?direct&300|}} ((photo by 4-pac of the XLFORUM http://xlforum.net/forums/showthread.php?t=254258)) \\ | + | {{:techtalk:evo:carb:intake_flanges_by_4-pac.jpg?direct&300|}} ((photo by 4-pac of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/53895-06-carb-to-07-fuel-injection-conversion?t=254258)) \\ |
====== Intake Flanges ====== | ====== Intake Flanges ====== | ||