Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
techtalk:evo:elec03 [2020/02/26 21:27] ixl2relax [Turn Signal/Security Module - TSSM] |
techtalk:evo:elec03 [2020/02/26 21:31] ixl2relax [Turn Signal/Security Module (TSSM) and Siren] |
||
|---|---|---|---|
| Line 699: | Line 699: | ||
| In this >[[https://serviceinfo.harley-davidson.com/sip/service/document/118167?locale=en_US|Siren Install Guide]], there are two different extension cables mentioned. These cables reach from the stock harness connector by the electrical panel and battery (the connector is located in the same place on all 2004-later models) to below the bike where the siren will be mounted. These cables are not represented on the electrical schematics. | In this >[[https://serviceinfo.harley-davidson.com/sip/service/document/118167?locale=en_US|Siren Install Guide]], there are two different extension cables mentioned. These cables reach from the stock harness connector by the electrical panel and battery (the connector is located in the same place on all 2004-later models) to below the bike where the siren will be mounted. These cables are not represented on the electrical schematics. | ||
| - | For 2004-05 models, use a conversion/extension cable, 91702-04. On these models, the stock electrical harness connector for the siren is a 3-pin Deutsch connector, triangular in shape. This extension cable has the 3-pin triangular harness connector on one end and connects to the siren which uses a 3-pin Delphi Packard connector. | + | For 2004-05 models, use a conversion/extension cable, 91702-04. On these models, the stock electrical harness connector for the siren is a 3-pin Deutsch connector, triangular in shape. This extension cable has the 3-pin triangular harness connector on one end and connects to the siren which uses an oval, 3-pin, Delphi Packard connector. |
| - | For 2006-later models, use the extension cable, 91734-06. On these models, the stock electrical harness connector for the siren is a 3-pin Delphi Packard connector that mates with the connector on the siren. So this is a simple, true extension cable, with mating siren connectors on the ends. | + | For 2006-later models, use the extension cable, 91734-06. On these models, the stock electrical harness connector for the siren is an oval, 3-pin, Delphi Packard connector that matches with the connector on the siren. So this cable is a simple, true extension cable, with mating siren connectors on the ends. |
